[C-ZB-LC20] Getting Started

[C-ZB-LC20] Getting Started



Getting Started with your Candeo C-ZB-LC20

Download the Instruction Manual here:

C-ZB-LC20 Instruction Manual

Wiring Instructions

Please see our wiring article:

Installation Instructions

We recommend installing the LED controller using the included double sided sticky patch included, however you can also mount it using a screw through the slot just below the input.

Factory Reset the Device

  1. Method 1:
    1. Press and hold the reset button for 5 seconds. The LED strip will flash 3 times.
  2. Method 2:
    1. Power on the controller.
    2. Within 2 seconds disconnect the power.
    3. Wait for at least 5 seconds.
    4. Repeat steps a through c 5 times.
    5. The LED strip will flash 3 times.

Pairing

Prepare your smart hub:

Home Assistant - ZHA
zigbee2mqtt
SmartThings
Hubitat
Hue
Amazon Echo
Other Zigbee 3.0 platforms
Home Assistant - ZHA


No preparation needed - the device will work natively with ZHA.
zigbee2mqtt


No preparation needed - the device will work natively with zigbee2mqtt.
SmartThings


You will need to install our driver:

  1. We recommend you unpair any of these remotes already paired first.
  2. Click the link below:
    Candeo custom SmartThings drivers
  3. Sign in to your Samsung account.
  4. Click "Enroll".
  5. Click "Available Drivers".
  6. Now find your model in the descriptions.
  7. Click "Install" under the driver details.
Hubitat


You will need to install our driver:
  1. We recommend that any C-ZB-LC20 devices added previously should be unpaired, and then paired again after a factory reset, and choosing the correct mode.
  2. On your Hubitat instance go to Drivers code.
  3. Click "+ New driver".
  4. Click "Import".
  5. Paste one of the following into the box that pops up: 
    1. For CCT mode: https://github.com/candeosmart/hubitat-zigbee/blob/main/Candeo%20C-ZB-LC20%20Smart%20LED%20Controller%20(CCT%20Mode).groovy
    2. For RGBW mode: https://github.com/candeosmart/hubitat-zigbee/blob/main/Candeo%20C-ZB-LC20%20Smart%20LED%20Controller%20(RGBW%20Mode).groovy
    3. For RGB mode: https://github.com/candeosmart/hubitat-zigbee/blob/main/Candeo%20C-ZB-LC20%20Smart%20LED%20Controller%20(RGB%20Mode).groovy
    4. For RGBCCT mode: https://github.com/candeosmart/hubitat-zigbee/blob/main/Candeo%20C-ZB-LC20%20Smart%20LED%20Controller%20(RGBCCT%20Mode).groovy
    5. For dimmer mode: https://github.com/candeosmart/hubitat-zigbee/blob/main/Candeo%20C-ZB-LC20%20Smart%20LED%20Controller%20(Dimmer%20Mode).groovy
  6. Click "Import".
  7. Click "Save".
  8. To add more drivers repeat the process.

Hue


The core features for this device work in Philips Hue. For more advanced features, an alternative Zigbee platform is recommended.
Amazon Echo


The core features are supported natively in Amazon Echo devices that have Zigbee. For more advanced features an alternative Zigbee platform is recommended.
Other Zigbee 3.0 platforms
Please follow the pairing instructions for your hub.
 

Put the Device in Pairing Mode:

After you have performed the factory reset, your controller should be ready to pair. If your hub can't find the controller please try powering the controller off and on again.

FAQs and Troubleshooting


Firmware Updates

  1. Please note this is only available to those using Home Assistant.
Firmware Installation Instructions
Home Assistant - ZHA
zigbee2mqtt
Home Assistant - ZHA
zigbee2mqtt
This firmware update is directly available in zigbee2mqtt

    • Related Articles

    • [C-WL-LC60] WLED Controller - Getting Started

      Getting Started with your Candeo C-WL-LC60 Download the Instruction Manual here: C-WL-LC60 Instruction Manual Wiring Instructions Please see our wiring article: [C-WL-LC60] Wiring Instructions Installation Instructions We recommend installing the LED ...

    • [201 Family] Candeo Zigbee Dimming Modules - Getting started

      Getting Started with your Candeo Zigbee Dimming Module Download the Instruction Manual here: C201 Instruction Manual C-ZB-DM201-2G Instruction Manual Wiring Instructions Please see our wiring articles: C201 Wiring C-ZB-DM201-2G Wiring Installation ...

    • [C202 Family] Getting Started

      Getting Started Download the Instruction Manual here: C202 & C202N Instructions Wiring Instructions Please see our wiring article Installation Instructions After wiring, the C202 should be screwed to your backbox using either screws from your old ...

    • [C-ZB-SE**] All Candeo Zigbee Sensors - Getting Started

      Getting Started with your Candeo Zigbee Sensor Download your Instruction Manual here: Door Sensor Instruction Manual Motion Sensor Instruction Manual Soil Sensor Instruction Manual Temperature Sensor Instruction Manual Water Sensor Instruction Manual ...

    • [C203/C204/C-ZB-DM204] Candeo Zigbee Dimming Modules - Getting started

      Getting Started with your Candeo Zigbee Dimming Module Download the Instruction Manual here: C203 and C-ZB-DM204 (C204) Instruction Manual Wiring Instructions Please see our wiring article: C203 and C-ZB-DM204 (C204) wiring Installation Instructions ...