[C-ZB-LC20] Firmware update instructions for Home Assistant (ZHA and zigbee2mqtt)

[C-ZB-LC20] Firmware update instructions for Home Assistant (ZHA and zigbee2mqtt)

After the update, the device should report as C-ZB-LC20v2.

zigbee2mqtt

The update is available directly within the zigbee2mqtt interface.

ZHA

1. Create a new folder inside your Home Assistant “config” directory for storing the OTA firmware file. In this example, we will name the folder zhaota.
2. Add the following lines to your configuration.yaml file, or update your existing ZHA OTA section:

zha:
  zigpy_config:
    ota:
      extra_providers:
        - type: z2m
After saving the file, restart Home Assistant.
Once configured, Home Assistant will check the zigbee2mqtt firmware repository for updates.
We intend to use this method wherever possible in future.

    • Related Articles

    • [C201] Firmware update instructions for ZHA

      Please note these instructions are currently for ZHA only. If your date code is 20241020, 20240813 or 20230824 and you're using ZHA you do not need to do this update. You should not attempt this update unless your batch # and date code aren't in the ...

    • [C202 Family] Firmware update instructions for ZHA

      Please note these instructions are currently for ZHA only. You should not attempt this update unless your batch # and date code aren't in the table below. The most up to date firmwares have Date Codes: 20250201. The most up to date sw build id is ...

    • [C201] Firmware update instructions for Zigbee2MQTT

      Please note these instructions are for Zigbee2MQTT only. You should not attempt this update unless your batch # and date code aren't in the table below. The most up-to-date firmware has Date Code: 20241020. The most up-to-date SW build ID is 1.30. ...

    • [C202 Family] Firmware update instructions for Zigbee2MQTT

      Please note these instructions are for Zigbee2MQTT only. You should not attempt this update unless your batch # and date code aren't in the table below. The most up-to-date firmware has Date Code: 20250201. The most up-to-date SW build ID is 1.40. ...

    • [201 Family] Candeo Zigbee Dimming Modules - Getting started

      Getting Started with your Candeo Zigbee Dimming Module Download the Instruction Manual here: C201 Instruction Manual C-ZB-DM201-2G Instruction Manual Wiring Instructions Please see our wiring articles: C201 Wiring C-ZB-DM201-2G Wiring Installation ...