[C203/C204/C-ZB-DM204] Candeo Zigbee Dimming Modules - Getting started

[C203/C204/C-ZB-DM204] Candeo Zigbee Dimming Modules - Getting started


Manual & Documentation

Download the Instruction Manual here:

Wiring Guide

Please see our wiring article:

Installation Instructions

Our dimming modules are designed to fit inside your backbox.

Factory Reset the Device

  1. After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device.
  2. To do this, press the reset button 5 times.
  3. If the module is not accessible, switch the power off and on 5 times.
  4. The lamp will blink 3 times to indicate a successful factory reset.

Pairing

Prepare your smart hub:


Home Assistant - ZHA [Click to Expand ▾]
Works with Home Assistant ZHA

No preparation is needed — the device will work natively with ZHA.

Zigbee2MQTT [Click to Expand ▾]
Works with Zigbee2MQTT

No preparation is needed — the device will work natively with Zigbee2MQTT.

SmartThings [Click to Expand ▾]


You will need to install our driver:
  1. We recommend you unpair any C203/C204/C-ZB-DM204 devices already paired first.
  2. Go to:
    Candeo SmartThings Drivers
  3. Sign in to your Samsung account.
  4. Click "Enroll".
  5. Click "Available Drivers".
  6. Now find your model in the descriptions.
  7. Click "Install" under the driver details.
Hubitat [Click to Expand ▾]


You will need to install our driver:
  1. On your Hubitat instance, go to Drivers code.
  2. Click "+ New driver".
  3. Click "Import".
  4. Paste the following into the box that pops up:
    For C203: 
    https://raw.githubusercontent.com/candeosmart/hubitat-zigbee/main/Candeo%20C203%20Zigbee%20Dimmer%20Module%20(L%2BN).groovy
    For C204/C-ZB-DM204: 
    https://raw.githubusercontent.com/candeosmart/hubitat-zigbee/main/Candeo%20C204%20Zigbee%20Dimmer%20Module%20(With%20Or%20Without%20Neutral).groovy
  5. Click "Import".
  6. Click "Save".
Philips Hue [Click to Expand ▾]
Works with Philips Hue

Core switching and dimming features are natively supported in Philips Hue. For advanced features or custom parameter configuration, a dedicated Zigbee hub is recommended.

Amazon Echo [Click to Expand ▾]
Works with Amazon Echo

Core switching and dimming features are natively supported across Amazon Echo devices with built-in Zigbee hubs. For advanced features or custom parameter configuration, a dedicated Zigbee hub is recommended.

Other Zigbee 3.0 Platforms [Click to Expand ▾]

Please follow the standard device pairing and search procedure outlined in your specific hub's manufacturer documentation.

 

Put the Device in Pairing Mode:

After performing the factory reset your dimming module should be ready to pair. If your hub does not find your dimmer module please power the module off and power on, and try again within 15 seconds of powering on.