[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to my Zigbee hub?
For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or SmartThings please click the relevant link below:
Firstly, we recommend doing a factory reset:
- Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds.
C-ZB-RD1
- Set your hub to pairing mode
- Open your hub’s app (SmartThings, Hubitat, Home Assistant, etc.)
- Select “Add Device” or “Join Device”
- Choose Zigbee device category
- Activate pairing on RD1
- Button sequence: 2 short presses + long 3rd press
- LED confirmation: Green and blue LEDs flash simultaneously
- Pairing mode lasts 3 minutes
- Complete pairing
- Hub should discover the device within 30 seconds
- Device will appear as “Candeo RD1”
- LED will show solid green briefly when successfully paired
C-ZB-RD1P
Please refer to the detailed Mode comparison chart for mode details:
Choose the mode in which you wish to operate your device before pairing, using the commands given below:
| Mode | Command | LED Feedback |
|---|---|---|
| Dimmer | 3 short presses | Red LED flashes 6 times |
| Remote Mode (smart bulb mode) | 4 short presses | Green LED flashes 6 times |
| Dual Purpose Mode | 5 short presses | Blue LED flashes 6 times |
- Set your hub to pairing mode
- Open your hub’s app (SmartThings, Hubitat, Home Assistant, etc.)
- Select “Add Device” or “Join Device”
- Choose Zigbee device category
- Activate pairing on RD1-Pro
- Button sequence: 2 short presses + long 3rd press
- LED confirmation: Green and blue LEDs flash simultaneously
- Pairing mode lasts 3 minutes
- Complete pairing
- Hub should discover the device within 30 seconds
- Device will appear as “Candeo RD1”
- LED will show solid green briefly when successfully paired
Related Articles
[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Home Assistant? (ZHA)
Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds. Add our custom zigbee2mqtt converter to your ...[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Hubitat Elevation?
Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds. Import the custom driver: On your Hubitat ...[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Home Assistant? (zigbee2mqtt)
Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds. Add our custom zigbee2mqtt converter to your ...[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Philips Hue?
Please note that the RD1-Pro will only work in dimmer mode with Philips Hue Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED ...[C202/C202N] How do I pair my Zigbee rotary switch to my Zigbee hub?
For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or Smartthings please click the relevant link below: Home Assistant ZHA pairing instructions Home Assistant zigbee2mqtt pairing instructions Hubitat pairing instructions ...