[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1P Zigbee rotary switch to Samsung SmartThings?

[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1P Zigbee rotary switch to Samsung SmartThings?


  1. Firstly, we recommend doing a factory reset:
    1. Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds.
  2. Install our new custom driver:
    1. We recommend you unpair any devices related to the driver you are installing.
    2. Go to:
    3. Sign in to your Samsung account.
    4. Click "Enroll".
    5. Click "Available Drivers".
    6. Now find your model in the descriptions.
    7. Click "Install" under the driver details.
  3. RD1 - Go to step 3, RD1P - Choose your mode:
    1. Please refer to the detailed Mode comparison chart for mode details:
      Which mode should I select?

      Choose the mode in which you wish to operate your device before pairing, using the commands given below:

      2. ModeCommandLED Feedback
      Dimmer3 short pressesRed LED flashes 6 times
      Remote Mode (smart bulb mode)4 short pressesGreen LED flashes 6 times
      Dual Purpose Mode5 short pressesBlue LED flashes 6 times

  4. Set your hub to pairing mode:
    1. Open your SmartThings app.
    2. Go to devices.
    3. Select the room of your choice.
    4. Tap the +.
    5. Choose "Add a device".
    6. Choose  "Scan nearby".
  5. Activate pairing on RD1/RD1P
    1. Button sequence: 2 short presses + long 3rd press
      1. LED confirmation: Green and blue LEDs flash simultaneously
      2. Pairing mode lasts 3 minutes
  6. Complete pairing
    1. Hub should discover the device within 30 seconds
    2. Device will appear as “Candeo RD1” or "Candeo RD1P"
    3. LED will show solid green briefly when successfully paired
Notes
Please note, you only need to install the driver once. All further RD1/RD1P devices should pick up the new driver.