[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Home Assistant? (ZHA)

1. Add our custom quirk to your ZHA instance:
   (If you need any guidance regarding installing custom quirks, please see our How-To article)
1. RD1: 
   
1. https://github.com/candeosmart/homeassistant-zha/blob/main/candeo_c-zb-rd1_rotary_dimmer.py
2. RD1-Pro:
   
1. Dimmer Mode: 
   
1. https://github.com/candeosmart/homeassistant-zha/blob/main/candeo_c-zb-rd1p_rotary_dimmer_pro_dimmer_mode.py
2. Remote Mode:
   
1. https://github.com/candeosmart/homeassistant-zha/blob/main/candeo_c-zb-rd1p_rotary_dimmer_pro_remote_mode.py
3. Dual Purpose Mode:
   
1. https://github.com/candeosmart/homeassistant-zha/blob/main/candeo_c-zb-rd1p_rotary_dimmer_pro_dual_purpose_mode.py
   
Then, we recommend doing a factory reset:

1. Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds.
RD1 - Go to step 3, RD1P - Choose your mode:

1. Please refer to the detailed Mode comparison chart for mode details:
   Which mode should I select?
   
   Choose the mode in which you wish to operate your device before pairing, using the commands given below:

Mode	Command	LED Feedback
Dimmer	3 short presses	Red LED flashes 6 times
Remote Mode (smart bulb mode)	4 short presses	Green LED flashes 6 times
Dual Purpose Mode	5 short presses	Blue LED flashes 6 times



2. Set your hub to pairing mode:
1. Open your Home Assistant dashboard.
   
2. Go to the menu and click on settings.
   
3. Click "Devices & Services".
   
4. Click the blue "ADD INTEGRATION" button.
5. Click "Add Zigbee device".
   
6. Home Assistant will scan for new Zigbee devices.
   
3. Activate pairing on RD1/RD1P
   
1. Button sequence: 2 short presses + long 3rd press
1. LED confirmation: Green and blue LEDs flash simultaneously
2. Pairing mode lasts 3 minutes
   
4. Complete pairing
   
1. Hub should discover the device within 30 seconds
   
2. Device will appear as “Candeo RD1” or "Candeo RD1-Pro"
   
3. LED will show solid green briefly when successfully paired

• Related Articles

• [C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Home Assistant? (zigbee2mqtt)

  Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds. RD1 - Go to step 3, RD1P - Choose your mode: ...

• [C-ZB-SR5BR] How do I pair the 5 button remote with Home Assistant? (ZHA)

  Add our custom quirk to your ZHA instance: (If you need any guidance regarding installing custom quirks, please see our How-To article) ...

• [C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to my Zigbee hub?

  For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or SmartThings please click the relevant link below: Home Assistant ZHA pairing instructions Home Assistant zigbee2mqtt pairing instructions Hubitat pairing instructions ...

• [C202/C202N] How do I pair my zigbee rotary switch to Home Assistant? (ZHA)

  Factory Reset the switch: Turn on the light, press the knob 5 times with a long press on the fifth time (3 seconds). Once reset successfully, the lamp will blink 5 times. Note: All configuration parameters will be reset after the device is reset or ...

• [C-ZB-SM205-2G] How do I pair my Zigbee lighting module to Home Assistant? (ZHA)

  Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...