[C-ZB-SR5BR] How do I pair the 5 button remote with Home Assistant? (ZHA)

1. Add our custom quirk to your ZHA instance:
   (If you need any guidance regarding installing custom quirks, please see our How-To article)
1. https://github.com/candeosmart/homeassistant-zha/blob/main/candeo_c-zb-sr5br_scene_switch_remote_5_button_rotary.py
   
2. Set your hub to pairing mode:
   
1. Open your Home Assistant dashboard.
   
2. Go to the menu and click on settings.
   
3. Click "Devices & Services".
   
4. Click the blue "ADD INTEGRATION" button.
   
5. Click "Add Zigbee device".
   
6. Home Assistant will scan for new Zigbee devices.
   
3. Activate pairing on the remote:
   
1. Press the centre button 5 times quickly, followed by a long 6th press (3 seconds).
   
2. The device will reset and then remain in pairing mode for 3 minutes, during which time the LED will flash red.
   

• Related Articles

• [C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Home Assistant? (ZHA)

  Add our custom quirk to your ZHA instance: (If you need any guidance regarding installing custom quirks, please see our How-To article) RD1: https://github.com/candeosmart/homeassistant-zha/blob/main/candeo_c-zb-rd1_rotary_dimmer.py RD1-Pro: Dimmer ...

• [C-ZB-SR5BR] How do I install Home Assistant ZHA quirks?

  ⚠️ To follow these steps you’ll need a file editor installed in Home Assistant. These instructions are based on Studio Code Server. ✏️ Editing your configuration.yaml file Open Studio Code Server in your Home Assistant instance. Select ...

• [C-ZB-SR5BR] How do I pair the 5 button remote with Home Assistant? (Zigbee2MQTT)

  Set your hub to pairing mode: Open your Home Assistant dashboard. Click "Permit join". Home Assistant will scan for new Zigbee devices. Activate pairing on the remote: Press the centre button 5 times quickly, followed by a long 6th press (3 seconds). ...

• [C-ZB-SR5BR] How do I pair the 5 button remote to my Zigbee hub?

  For pairing instructions specific to Home Assistant, Hubitat, or Smartthings please click the relevant link below: Home Assistant (ZHA) pairing instructions Home Assistant (Zigbee2MQTT) pairing instructions Hubitat pairing instructions SmartThings ...

• [C-ZB-SM205-2G] How do I pair my Zigbee lighting module to Home Assistant? (ZHA)

  Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...