[C-ZB-SR5BR] How do I pair the 5 button remote with Home Assistant? (Zigbee2MQTT)
- Set your hub to pairing mode:
- Open your Home Assistant dashboard.
- Click "Permit join".
- Home Assistant will scan for new Zigbee devices.
- Activate pairing on the remote:
- Press the centre button 5 times quickly, followed by a long 6th press (3 seconds).
- The device will reset and then remain in pairing mode for 3 minutes, during which time the LED will flash red.
Related Articles
[C-ZB-SR5BR] How do I pair the 5 button remote with Home Assistant? (ZHA)
Add our custom quirk to your ZHA instance: (If you need any guidance regarding installing custom quirks, please see our How-To article) ...[C-ZB-SR5BR] How do I pair the 5 button remote to my Zigbee hub?
For pairing instructions specific to Home Assistant, Hubitat, or Smartthings please click the relevant link below: Home Assistant (ZHA) pairing instructions Home Assistant (Zigbee2MQTT) pairing instructions Hubitat pairing instructions SmartThings ...[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Home Assistant? (ZHA)
Add our custom quirk to your ZHA instance: (If you need any guidance regarding installing custom quirks, please see our How-To article) RD1: https://github.com/candeosmart/homeassistant-zha/blob/main/candeo_c-zb-rd1_rotary_dimmer.py RD1-Pro: Dimmer ...[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Home Assistant? (zigbee2mqtt)
Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds. RD1 - Go to step 3, RD1P - Choose your mode: ...[C-ZB-SR5BR] How do I install a new Home Assistant blueprint?
? Available Blueprints ? Candeo C-ZB-SR5BR – Multi-Light Dimming Control up to 4 lights from one SR5BR: ? Buttons 1–4 choose which light is “active”. ? Centre button toggles the active light on/off. ? Rotary ring dims the active light (clockwise ...