[C-ZB-SR5BR] How do I install a new Home Assistant blueprint?

[C-ZB-SR5BR] How do I install a new Home Assistant blueprint?

📘 Available Blueprints

🔹 Candeo C-ZB-SR5BR – Multi-Light Dimming

Control up to 4 lights from one SR5BR:

  • 🔹 Buttons 1–4 choose which light is “active”.
  • 🔘 Centre button toggles the active light on/off.
  • 🎚 Rotary ring dims the active light (clockwise = brighter, anti-clockwise = darker).

💡 Candeo C-ZB-SR5BR – Smart Bulb Control

🛠 Setup Required:

  • Create an input_select helper in Home Assistant
    (Settings → Devices & actions → Helpers → Dropdown)
  • Options: brightness, white temperature, colour

💡 How It Works:

  • 🔹 Buttons 1–4: Activate your chosen scene/script (optional)
  • 🔘 Centre button (press): Toggle the main entity
  • 🔄 Centre button (double press): Cycles dial modes (brightness → white temperature → colour)
  • 🎚 Rotary dial: Adjust brightness / white temperature / hue depending on the current mode

📝 Instructions

  1. Click the relevant link beneath this section.
    1. This should open your Home Assistant instance in a new tab.
    2. You may need to click "Save" on the first page to continue.
  2. Click "Open link".
  3. Login to Home Assistant.
  4. Click "PREVIEW".
  5. Click "IMPORT BLUEPRINT".

🌐 ZHA

🔹 Candeo C-ZB-SR5BR – Multi-Light Dimming

💡 Candeo C-ZB-SR5BR – Smart Bulb Control

🌐 Zigbee2MQTT

🔹 Candeo C-ZB-SR5BR – Multi-Light Dimming

💡 Candeo C-ZB-SR5BR – Smart Bulb Control

    • Related Articles

    • [CMM-1] How do I install a new Home Assistant blueprint?

      Due to the Zigbee2MQTT 2.0.0 update, the Zigbee2MQTT blueprint has been updated, the old blueprint no longer works. (08/01/2025) If you haven't already installed our original blueprint, you can go ahead and click the Zigbee2MQTT Import to my home ...

    • [C-ZB-SR5BR] Zigbee 5 Button Rotary Remote - Getting Started

      Getting Started with your Candeo CMM-1 Download the Instruction Manual here: 5 Button Rotary Remote Instruction Manual Pairing Prepare your smart hub: Home Assistant - ZHA zigbee2mqtt SmartThings Hubitat Hue Amazon Echo Other Zigbee 3.0 platforms ...

    • How to install drivers, quirks and blueprints

      Home Assistant - ZHA & zigbee2mqtt SmartThings Hubitat Home Assistant - ZHA & zigbee2mqtt Quirks (ZHA only) Editing your configuration.yaml file Open Studio Code Server in your Home Assistant instance. Select configuration.yaml, then click inside the ...

    • [C-ZB-LC20] Firmware update instructions for Home Assistant (ZHA and zigbee2mqtt)

      After the update, the device should report as C-ZB-LC20v2. zigbee2mqtt The update is available directly within the zigbee2mqtt interface. ZHA 1. Create a new folder inside your Home Assistant “config” directory for storing the OTA firmware file. In ...

    • [CSF1TZ] How do I install Home Assistant ZHA quirks?

      To do this you must have file editor installed on your Home Assistant instance. Editing your configuration.yaml file. On your Home Assistant instance click file editor. Click the folder button ("Browse Filesystem") Select configuration.yaml, and then ...