[C202/C202N] How do I pair my zigbee rotary switch to Samsung Smartthings?

[C202/C202N] How do I pair my zigbee rotary switch to Samsung Smartthings?



Please note the new driver is currently for product codes #10 and above. Do not install it if your product code # is below 10.
You can identify the # code on the back of the device.
If you have multiple devices, of both compatible and incompatible product codes, you can either install the driver and change the drivers individually, or not install the driver.
  1. Factory Reset the switch:
    1. Turn on the light, press the knob 5 times with a long press on the fifth time (3 seconds).
    2. Once reset successfully, the lamp will blink 5 times.
    3. Note: All configuration parameters will be reset after the device is reset or removed from the network.
  2. Install our new custom driver:
    1. We recommend you unpair any C202/C202N devices already paired first.
    2. Go to:
    3. Sign in to your Samsung account.
    4. Click "Enroll".
    5. Click "Available Drivers".
    6. Now find your model in the descriptions.
    7. Click "Install" under the driver details.
  3. To initiate pairing mode to pair to Smartthings, open your Smartthings app:
    1. Go to devices.
    2. Select the room of your choice.
    3. Tap the +.
    4. Choose "Add a device".
    5. Choose  "Scan nearby".
  4. Turn on your lamp, then double press the knob, with a long press (3 seconds) on the second time.
    1. The light will blink twice to indicate it is in network pairing mode, which will last for 15 minutes. If your connection attempt times out, repeat this step if necessary.
    2. When successfully paired the light will blink once, and then stay continuously on. The device can now be controlled through your controller or hub interface.
      1. If you struggle to pair your device, please try to move either the device or the hub, so they are closer together. You can move them back again after pairing.
Please note, you only need to install the driver once. All further C202/C202N devices should pick up the new driver.