[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Philips Hue?
Please note that the RD1-Pro will only work in dimmer mode with Philips Hue
- Firstly, we recommend doing a factory reset:
- Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds.
- Set your hub to pairing mode
- In your Philips Hue app, go to “Settings”, then “Lights”, then add a light by selecting the “+”, then select “Search”.
- Your Philips Hue Bridge will find the switch and give you the option to rename it as you wish.
- Activate pairing on RD1/RD1-Pro
- Button sequence: 2 short presses + long 3rd press
- LED confirmation: Green and blue LEDs flash simultaneously
- Pairing mode lasts 3 minutes
- Complete pairing
- Hub should discover the device within 30 seconds
- Device will appear as “Candeo RD1”
- LED will show solid green briefly when successfully paired
Related Articles
[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to my Zigbee hub?
For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or SmartThings please click the relevant link below: Home Assistant ZHA pairing instructions Home Assistant zigbee2mqtt pairing instructions Hubitat pairing instructions ...[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Home Assistant? (ZHA)
Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds. Add our custom zigbee2mqtt converter to your ...[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Hubitat Elevation?
Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds. Import the custom driver: On your Hubitat ...[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Home Assistant? (zigbee2mqtt)
Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds. Add our custom zigbee2mqtt converter to your ...[C-ZB-SM205-2G] How do I pair my Zigbee lighting module to Philips Hue?
Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...