[C-ZB-SM205-2G] How do I pair my zigbee lighting module to Philips Hue?

[C-ZB-SM205-2G] How do I pair my zigbee lighting module to Philips Hue?












  1. Factory Reset the module:
    1. After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device.
    2. To do this, press the reset button 5 times.
    3. If the module is not accessible, switch the power off and on 5 times.
    4. The lamp will blink 3 times to indicate a successful factory reset.
  2. In your Philips Hue app, go to “Settings”, then “Lights”, then add a light by selecting the “+”, then select “Search”.
  3. Your Philips Hue Bridge will find the switch and give you the option to rename it as you wish.


    • Related Articles

    • [C-ZB-LC20] How do I pair my zigbee LED controller to Philips Hue?

      Factory Reset the controller: Method 1: Press and hold the reset button for 5 seconds. The LED strip will flash 3 times. Method 2: Power on the controller. Within 2 seconds disconnect the power. Wait for at least 5 seconds. Repeat steps i. through ...
    • [C201] How do I pair my zigbee lighting module to Philips Hue?

      Firstly, we recommend doing a factory reset: Turn on the light, press and hold the reset button for over 5 seconds. Then put the switch in network pairing mode. Double press the reset button to activate zigbee pairing mode. In your Philips Hue app, ...
    • [C205] How do I pair my zigbee lighting module to Philips Hue?

      Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...
    • [C-RFZB-SM1] How do I pair my zigbee rotary switch to Philips Hue?

      In your Philips Hue app, go to “Settings”, then “Lights”, then add a light by selecting the “+”, then select “Search”. Your Philips Hue Bridge will find the switch and give you the option to rename it as you wish. Press and hold the Control Button on ...
    • [C203/C204] How I do pair my dimming module to Philips Hue?

      Firstly, we recommend doing a factory reset: Turn on the light, press and hold the reset button for over 5 seconds. Then put the switch in network pairing mode. Double press the reset button to activate zigbee pairing mode. In your Philips Hue app, ...