[CMM-1] How do I pair the Modmote to my zigbee hub?
For pairing instructions specific to Home Assistant, Hubitat, Smartthings or Tuya Smart Life please click the relevant link below:
Pair your remote to your zigbee hub
- Initiate pairing mode on your zigbee hub.
- Put the remote into pairing mode:
- To put the device in pairing mode, press and hold the reset button for 10 seconds using the pin supplied.
- The LED at button 1 will blink green to indicate the remote is in pairing mode.
Related Articles
[CMM-1] How do I pair the Modmote with Hubitat Elevation?
Install the custom driver On your Hubitat instance, go to Drivers code. Click "+ New driver". Click "Import". Paste the following web address into the box that pops up: ...[CMM-1] How do I pair the Modmote with Home Assistant? (ZHA)
We recommend you install our ZHA modmote quirks, and the modmote blueprint first. The instructions can be found here: https://support.candeo.io/portal/en/kb/articles/cmm-1-how-do-i-install-home-assistant-zha-quirks ...[CMM-1] Charging the Modmote
Use a USB-C charger to charge the remote. The LED at button 3 will glow red to indicate charging. A full charge typically takes 4 hours. When charging is complete the LED at button 3 will glow green.[CMM-1] How do I pair my modmote to Samsung Smartthings?
Install our new custom driver: We recommend you unpair any modmote devices already paired first. Go to: https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20 Sign in to your Samsung account. Click "Enroll". Click "Available Drivers". Now ...[CMM-1] Modmote troubleshooting
The first step we recommend in any troubleshooting is a factory reset. Normally we would suggest simply removing the modmote from your smart hub, and using the reset button to pair it again. If this does not work there is a reset switch underneath ...