[CMM-1] Charging the Modmote

[CMM-1] Charging the Modmote



  1. Use a USB-C charger to charge the remote.
  2. The LED at button 3 will glow red to indicate charging. A full charge typically takes 4 hours.
  3. When charging is complete the LED at button 3 will glow green.

    • Related Articles

    • [CMM-1] Instruction booklet

      Instruction booklet for CMM-1 can be downloaded here.

    • [CMM-1] Modmote troubleshooting

      The first step we recommend in any troubleshooting is a factory reset. Normally we would suggest simply removing the modmote from your smart hub, and using the reset button to pair it again. If this does not work there is a reset switch underneath ...

    • [CMM-1] How do I pair the Modmote with Hubitat Elevation?

      Install the custom driver On your Hubitat instance, go to Drivers code. Click "+ New driver". Click "Import". Paste the following web address into the box that pops up: ...

    • [CMM-1] How do I pair my modmote to Samsung Smartthings?

      Install our new custom driver: We recommend you unpair any modmote devices already paired first. Go to: https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20 Sign in to your Samsung account. Click "Enroll". Click "Available Drivers". Now ...

    • [CMM-1] How do I pair the Modmote with Home Assistant? (ZHA)

      We recommend you install our ZHA modmote quirks, and the modmote blueprint first. The instructions can be found here: https://support.candeo.io/portal/en/kb/articles/cmm-1-how-do-i-install-home-assistant-zha-quirks ...