[CMM-1] How do I pair the Modmote with Hubitat Elevation?

[CMM-1] How do I pair the Modmote with Hubitat Elevation?


Install the custom driver
  1. On your Hubitat instance, go to Drivers code.
  2. Click "+ New driver".
  3. Click "Import".
  4. Paste the following web address into the box that pops up:
    https://raw.githubusercontent.com/candeosmart/hubitat-zigbee/main/Candeo%20Modmote%20Zigbee%20Scene%20Switch.groovy
  5. Click "Import".
  6. Click save.
    7. Notes Please note you only need to import the driver once. All CMM-1 Modmote devices added after the import will pick up the new driver.
Pair your remote to Hubitat
  1. Initiate pairing mode to pair to Hubitat (Adding to your Zigbee Network):
    1. Open your Hubitat dashboard.
      1. Go to devices.
      2. Click "Add Device".
      3. Under "Add device manually," select Zigbee.
  2. Put the remote into pairing mode:
    1. Press and hold the reset button for 10 seconds using the supplied pin.
    2. The LED at button 1 will blink green to indicate the remote is in pairing mode.

    • Related Articles

    • [CMM-1] How do I pair the Modmote to my zigbee hub?

      For pairing instructions specific to Home Assistant, Hubitat, Smartthings or Tuya Smart Life please click the relevant link below: Home Assistant pairing instructions Hubitat pairing instructions Smartthings pairing instructions Tuya Smart pairing ...

    • [CMM-1] How do I pair the Modmote with Home Assistant? (ZHA)

      We recommend you install our ZHA modmote quirks, and the modmote blueprint first. The instructions can be found here: https://support.candeo.io/portal/en/kb/articles/cmm-1-how-do-i-install-home-assistant-zha-quirks ...

    • [CMM-1] Charging the Modmote

      Use a USB-C charger to charge the remote. The LED at button 3 will glow red to indicate charging. A full charge typically takes 4 hours. When charging is complete the LED at button 3 will glow green.

    • [CMM-1] How do I pair my modmote to Samsung Smartthings?

      Install our new custom driver: We recommend you unpair any modmote devices already paired first. Go to: https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20 Sign in to your Samsung account. Click "Enroll". Click "Available Drivers". Now ...

    • [CMM-1] How do I install a new Hubitat driver?

      Importing the driver. On your Hubitat instance go to Drivers code. Click "+ New driver". Click "Import". Paste the following web address into the box that pops up: ...