[CMM-1] How do I pair my modmote to Samsung Smartthings?

1. Install our new custom driver:
1. We recommend you unpair any modmote devices already paired first.
2. Go to:
   
   https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20
   
3. Sign in to your Samsung account.
   
4. Click "Enroll".
   
5. Click "Available Drivers".
   
6. Now find your model in the descriptions.
   
7. Click "Install" under the driver details.
2. Add the remote to your Zigbee hub or bridge:
   
1. Open your Smartthings app.
   
1. Go to devices.
   
2. Select the room of your choice.
   
3. Tap the +.
   
4. Choose "Add a device".
   
5. Choose  "Scan nearby".

Please note, you only need to install the driver once. All further modmote devices should pick up the new driver.

• Related Articles

• [CMM-1] How do I pair the Modmote with Hubitat Elevation?

  Install the custom driver On your Hubitat instance go to Drivers code. Click "+ New driver". Click "Import". Paste the following web address into the box that pops up: ...

• [CMM-1] How do I pair the Modmote to my zigbee hub?

  For pairing instructions specific to Home Assistant, Hubitat, Smartthings or Tuya Smart Life please click the relevant link below: Home Assistant pairing instructions Hubitat pairing instructions Smartthings pairing instructions Tuya Smart pairing ...

• [CMM-1] How do I pair the Modmote with Home Assistant? (ZHA)

  We recommend you install our ZHA modmote quirks, and the modmote blueprint first. The instructions can be found here: https://support.candeo.io/portal/en/kb/articles/cmm-1-how-do-i-install-home-assistant-zha-quirks ...

• [CMM-1] Charging the Modmote

  Use a USB-C charger to charge the remote. The LED at button 3 will glow red to indicate charging. A full charge typically takes 4 hours. When charging is complete the LED at button 3 will glow green.

• [CMM-1] Instruction booklet

  Instruction booklet for CMM-1 can be downloaded here.