[C302-WF] Pairing to Smart Life

[C302-WF] Pairing to Smart Life



  1. Factory reset the switch:
    1. Press and hold the knob for 10 seconds.
    2. The light will blink twice to confirm a successful reset.
  2. Make sure your phone is prepared:
    1. Install the Smart Life app from your store
      (you can scan the qr code or click the links):
  3. Open the app and create an account if you don't already have one
    4. Make sure both Bluetooth and Wi-Fi are enabled on your phone.
Method 1 (Default):
  1. Open the Smart Life app and choose to add a new device with the (+) icon.

  2. Allow the app to scan for new devices.

  3. Once the new device has been discovered, tap it on the screen, and confirm your Wi-Fi details to add the Wifi dimmer to your devices.

  4. Rename the device as you wish, and you can now control the switch via the Smart Life app.
  5. If connection fails using the above method, please turn off bluetooth on your phone, factory reset the switch, and follow the steps below.
Method 2 (AP mode):
  1. Open the Smart Life app and choose to add a new device with the (+) icon.
  2. From the left hand device options, select “Lighting” and then choose “Light Source (Wi-fi)".

  3. Follow the steps in the Smart Life app, confirming your Wi-Fi details, and then indicating that the light is blinking slowly or breathing.

  4. Connect to the SmartLife Wi-Fi, and then go back to the app.

  5. Smart Life will find the switch, and allow you to add it to your devices.
  6. Rename the device as you wish, and you can now control the switch via the Smart Life app.

      • Related Articles

      • [C310] Pairing to Smart Life

        Important notes This is a dimming plug and only intended for use with lamps. Please do not plug anything into this which is not a lamp. This dimming plug should not be used with lamps that already have a dimmer attached. This plug is not intended to ...

      • [C302-WF] Instruction booklet

        The instruction booklet for C302-WF can be downloaded here.

      • [C310] I cannot connect to Smart Life

        Please check and confirm that the bulbs you are using are indeed dimmable. Pairing with Smart Life may be prevented if the dimming plug cannot ascertain the dimming range. Please ensure that the lamp is ON. Pairing may be prevented if using with a ...

      • [C302-WF] Voice control

        Voice control with Alexa and Google Assistant To allow control with Alexa you need to enable the “Smart Life” skill in the Alexa app. To allow control with Google Assistant you need to set up the “Smart Life” connection in the Google Home app.

      • [C302-WF] Setting the minimum brightness

        Open the Smart Life app and select the device. Turn on the light, and select the settings icon. Ensure that the brightness range settings are unlocked by touching the padlock icon. You can now configure the minimum brightness level for the switch. ...