[C-RFWF-SM1] How do I pair my Wi-Fi kinetic receiver to Tuya Smart Life?
- Press and hold the Control Button on the receiver for 10-15 seconds to simultaneously factory reset and put the device in pairing mode.
- Note: All configuration parameters will be reset after the device is reset or removed from the network.
- Choose to “Add Device” in the Smart Life app by pressing the (+) button in the top right corner of the app, and then follow the on screen instructions to complete the process.
Notes:
• Smart Life is a 3rd party app provided by Tuya.
• If this is your first device that utilises the Smart Life app, you will need to create an account and enter your Wi-Fi details.
• Your Wi-Fi must support a 2.4GHz network.
Related Articles
[C310] Pairing to Smart Life
Important notes This is a dimming plug and only intended for use with lamps. Please do not plug anything into this which is not a lamp. This dimming plug should not be used with lamps that already have a dimmer attached. This plug is not intended to ...[C302-WF] Pairing to Smart Life
Factory reset the switch: Press and hold the knob for 10 seconds. The light will blink twice to confirm a successful reset. Make sure your phone is prepared: Install the Smart Life app from your store (you can scan the qr code or click the links): ...[All kinetic products] Instruction booklet
Instruction booklet for all our kinetic products can be downloaded here.[All kinetic products] Instruction booklet
Instruction booklet for all our kinetic products can be downloaded here.[CSF1TZ] How do I pair my Smartfoss to Smart Life?
Make sure your phone is prepared: Install the Smart Life app from your store (you can scan the qr code or click the links): Google Play or Apple app store Open the app and create an account if you don't already have one. A Tuya zigbee gateway must ...