[C302-WF] Voice control

Voice control with Alexa and Google Assistant

1. To allow control with Alexa you need to enable the “Smart Life” skill in the Alexa app.
   
2. To allow control with Google Assistant you need to set up the “Smart Life” connection in the Google Home app.

• Related Articles

• [C302-WF] Instruction booklet

  The instruction booklet for C302-WF can be downloaded here.

• [C302-WF] Pairing to Smart Life

  Factory reset the switch: Press and hold the knob for 10 seconds. The light will blink twice to confirm a successful reset. Make sure your phone is prepared: Install the Smart Life app from your store (you can scan the qr code or click the links): ...

• [C302-WF] Retractive Switch Notes

  Requirements Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off) Retractive switches should also be press to make, not press to break. Some retractive switches have one terminal for ...

• [C-ZB-RD1P] Which mode should I choose for my 3-in-1 Zigbee rotary dimmer?

  Feature Dimmer Mode (Default) Remote/Smart Bulb Mode Dual Purpose Mode Firmware ID C-ZB-RD1P-DIM C-ZB-RD1P-REM C-ZB-RD1P-DPM Use Case Smart control of traditional (non-smart) lighting circuit containing dimmable lights Use as smart rotary remote for ...

• [C302-WF] Wiring Instructions

  Turn off the power To avoid electrical shock and/or equipment damage, disconnect ectrical power at the main fuse or circuit breaker before installation and maintenance. Be aware that even if the circuit breaker is off, some voltage may remain in the ...