[C210] How do I pair my Zigbee dimming plug to Hubitat Elevation?
Factory reset
It is recommended that you factory reset the device before pairing to a Zigbee network.
- Turn on the plug and lamp.
- Press the button 3 times quickly, holding for at least 2 seconds on the 3rd press.
- The light will flash twice.
Import custom driver
- On your Hubitat instance, go to Drivers code.
- Click "+ New driver".
- Click "Import".
- Paste the following into the box that pops up:
https://raw.githubusercontent.com/candeosmart/hubitat-zigbee/main/Candeo%20C210%20Zigbee%20Dimming%20Smart%20Plug.groovy - Click "Import".
- Click save.
Please note you only need to import the driver once. All C210 devices added after the import will pick up the new driver.Pairing
- Turn on the plug and lamp.
- Press the button 6 times quickly.
- The light will flash 3 times, indicating that the dimmer has entered pairing mode.
- Initiate pairing mode to pair to Hubitat (Adding to your Zigbee Network):
- Open your Hubitat instance,
- Go to devices.
- Click "Add Device".
- Under "Add device manually," select Zigbee.
Related Articles
[C210] How do I pair my zigbee dimming plug to my zigbee hub?
For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or Smartthings please click the relevant link below: Home Assistant pairing instructions Hubitat pairing instructions Philips Hue pairing instructions Smartthings pairing ...[C210] How do I pair my zigbee dimming plug to Home Assistant?
Factory reset It is recommended that you factory reset the device before pairing to a Zigbee network. Turn on the plug and lamp. Press the button 3 times quickly (holding for at least 2 seconds on the 3rd press). The light will flash twice. Pairing ...[C210] How do I pair my Zigbee dimming plug to Philips Hue?
Factory reset It is recommended that you factory reset the device before pairing to a Zigbee network. Turn on the plug and lamp. Press the button 3 times quickly (holding for at least 2 seconds on the 3rd press). The light will flash twice. Pairing ...[C-ZB-SM205-2G] How do I pair my zigbee lighting module to Hubitat Elevation?
Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...[C203/C204/C-ZB-DM204] How do I pair my Zigbee lighting module to Hubitat Elevation?
Factory reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...