[C210] How do I pair my zigbee dimming plug to Home Assistant?
Factory reset
- It is recommended that you factory reset the device before pairing to a Zigbee network.
- Turn on the plug and lamp.
- Press the button 3 times quickly (holding for at least 2 seconds on the 3rd press).
- The light will flash twice.
Pairing
- Turn on the plug and lamp.
- Press the button 6 times quickly.
- The light will flash 3 times, indicating that the dimmer has entered pairing mode.
- Add the dimming plug to your Home Assistant:
- Open your Home Assistant dashboard.
- Go to the menu and click on settings.
- Click "Devices & Services".
- Click the blue "ADD INTEGRATION" button.
- Click "Add Zigbee device".
- Home Assistant will scan for new Zigbee devices.
Related Articles
[C210] How do I pair my zigbee dimming plug to my zigbee hub?
For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or Smartthings please click the relevant link below: Home Assistant pairing instructions Hubitat pairing instructions Philips Hue pairing instructions Smartthings pairing ...[C-ZB-SM205-2G] How do I pair my zigbee lighting module to Home Assistant? (ZHA)
Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...[C-RFZB-SM1] How do I pair my zigbee kinetic module to Home Assistant? (zigbee2mqtt)
Add your dimmer to your Home Assistant: Open your Home Assistant dashboard. Go to the menu and click on settings. Click "Devices & Services". Click the blue "ADD INTEGRATION" button. Click "Add Zigbee device". Home Assistant will scan for new zigbee ...[C-RFZB-SM1] How do I pair my zigbee kinetic module to Home Assistant? (ZHA)
Add your dimmer to your Home Assistant: Open your Home Assistant dashboard. Go to the menu and click on settings. Click "Devices & Services". Click the blue "ADD INTEGRATION" button. Click "Add Zigbee device". Home Assistant will scan for new zigbee ...[C-ZB-LC20] How do I pair my zigbee LED controller to Home Assistant?
Factory Reset the controller: Method 1: Press and hold the reset button for 5 seconds. The LED strip will flash 3 times. Method 2: Power on the controller. Within 2 seconds disconnect the power. Wait for at least 5 seconds. Repeat steps i. through ...