[C-ZB-SR5BR] How do I pair the 5 button remote with Hubitat Elevation?

1. Add our custom Hubitat driver:
   
1. On your Hubitat instance, go to Drivers code.
   
2. Click "+ New driver".
   
3. Click "Import".
   
4. Paste the following web address into the box that pops up:
   https://github.com/candeosmart/hubitat-zigbee/blob/main/Candeo%20C-ZB-SR5BR%20Zigbee%20Scene%20Switch%20Remote%20-%205%20Button%20Rotary.groovy
5. Click "Import".
   
6. Click "Save".
   
   

   Please note you only need to import the driver once. All 5 button remote devices added after the import will pick up the new driver.
2. Set your hub to pairing mode:
   
1. Open your Hubitat dashboard.
   
2. Go to devices.
   
3. Click "Add Device".
   
4. Under "Add device manually," select Zigbee.
   
5. Hubitat will scan for new Zigbee devices.
   
3. Activate pairing on the remote:
   
1. Press the centre button 5 times quickly, followed by a long 6th press (3 seconds).
   
2. The device will reset and remain in pairing mode for 3 minutes, during which time the LED will flash red.
   
4. Complete pairing:
   
1. Hub should discover the device within 30 seconds.

• Related Articles

• [C-ZB-SR5BR] How do I pair the 5 button remote to my Zigbee hub?

  For pairing instructions specific to Home Assistant, Hubitat, or Smartthings please click the relevant link below: Home Assistant (ZHA) pairing instructions Home Assistant (Zigbee2MQTT) pairing instructions Hubitat pairing instructions SmartThings ...

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to Hubitat Elevation?

  Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...

• [C203/C204/C-ZB-DM204] How do I pair my Zigbee lighting module to Hubitat Elevation?

  Factory reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...

• [C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Hubitat Elevation?

  Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds. Import the custom driver: On your Hubitat ...

• [C-ZB-SR5BR] How do I pair the 5 button remote with Home Assistant? (ZHA)

  Add our custom quirk to your ZHA instance: (If you need any guidance regarding installing custom quirks, please see our How-To article) ...