[C210] How do I pair my zigbee dimming plug to Philips Hue?

[C210] How do I pair my zigbee dimming plug to Philips Hue?



Factory reset
  1. It is recommended that you factory reset the device before pairing to a Zigbee network.
  1. Turn on the plug and lamp.
  2. Press the button 3 times quickly (holding for at least 2 seconds on the 3rd press).
  3. The light will flash twice.
Pairing
  1. Turn on the plug and lamp.
  2. Press the button 6 times quickly.
  3. The light will flash 3 times, indicating that the dimmer has entered pairing mode.
  4. Add the dimming plug to Philips Hue:
  5. In your Philips Hue app, go to “Settings”, then “Lights”,
    1. Then add a light by selecting the “+”, then select “Search”.
    2. Your Philips Hue Bridge will find the plug and give you the option to rename it as you wish.

    • Related Articles

    • [C210] How do I pair my zigbee dimming plug to my zigbee hub?

      For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or Smartthings please click the relevant link below: Home Assistant pairing instructions Hubitat pairing instructions Philips Hue pairing instructions Smartthings pairing ...

    • [C-ZB-LC20] How do I pair my zigbee LED controller to Philips Hue?

      Factory Reset the controller: Method 1: Press and hold the reset button for 5 seconds. The LED strip will flash 3 times. Method 2: Power on the controller. Within 2 seconds disconnect the power. Wait for at least 5 seconds. Repeat steps i. through ...

    • [C203/C204] How I do pair my dimming module to Philips Hue?

      Firstly, we recommend doing a factory reset: Turn on the light, press and hold the reset button for over 5 seconds. Then put the switch in network pairing mode. Double press the reset button to activate zigbee pairing mode. In your Philips Hue app, ...

    • [C-ZB-SM205-2G] How do I pair my zigbee lighting module to Philips Hue?

      Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...

    • [C201] How do I pair my zigbee lighting module to Philips Hue?

      Firstly, we recommend doing a factory reset: Turn on the light, press and hold the reset button for over 5 seconds. Then put the switch in network pairing mode. Double press the reset button to activate zigbee pairing mode. In your Philips Hue app, ...