[C203/C204/C-ZB-DM204] How do I change the switch type?
- The modules are preconfigured to work with retractive switches, as this allows you to control on/off, and also dimming.
- If you are using Smartthings, Hubitat, ZHA, or zigbee2mqtt, you will have a device setting to change the switch type to “Toggle”.
You must be using the Candeo drivers to access this setting in Smartthings and Hubitat, and the Home Assistant quirk for ZHA.
Instructions for installing these drivers can be found here:
Note that when using rocker/toggle switches, you will not be able to dim from the switch.
Related Articles
[C205] How do I change the switch type?
The C205 module is preconfigured to work with toggle/rocker switches. If you are using Smartthings, Hubitat, ZHA, or zigbee2mqtt, you will have a device setting to change the switch type to “Momentary”. You must be using the Candeo drivers to access ...
[C-WL-LC60] Retractive Switch Notes
Requirements Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off) Retractive switches should also be press to make, not press to break. Some retractive switches have one terminal for ...
[C-ZB-LC20] Retractive Switch Notes
Requirements Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off) Retractive switches should also be press to make, not press to break. Some retractive switches have one terminal for ...
[C201/C203/C204/C-ZB-DM204] Retractive Switch Notes
Requirements Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off) Retractive switches should also be press to make, not press to break. Some retractive switches have one terminal for ...
[C-ZB-LC20] Instruction booklet
Instruction booklet for our C-ZB-LC20 zigbee LED controller can be downloaded here.