[C-ZB-LC20] Retractive Switch Notes
Requirements
- Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off)
- Retractive switches should also be press to make, not press to break.
- Some retractive switches have one terminal for each mode, for example the Scolmore click range seem to use L1 for press to make, and L2 for press to break.
- In this case L2 should be avoided.
Related Articles
[C201/C203/C204/C-ZB-DM204] Retractive Switch Notes
Requirements Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off) Retractive switches should also be press to make, not press to break. Some retractive switches have one terminal for ...[C-WL-LC60] Retractive Switch Notes
Requirements Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off) Retractive switches should also be press to make, not press to break. Some retractive switches have one terminal for ...[C302-WF] Retractive Switch Notes
Requirements Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off) Retractive switches should also be press to make, not press to break. Some retractive switches have one terminal for ...[C202/C202N] Retractive Switch Notes
Requirements Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off) Retractive switches should also be press to make, not press to break. Some retractive switches have one terminal for ...[C203/C204/C-ZB-DM204] How do I change the switch type?
The modules are preconfigured to work with retractive switches, as this allows you to control on/off, and also dimming. If you are using Smartthings, Hubitat, ZHA, or zigbee2mqtt, you will have a device setting to change the switch type to “Toggle”. ...