[RD1 Series] Remote & Binding FAQs

[RD1 Series] Remote & Binding FAQs

Can I use my RD1/RD1-Pro as a remote/decoupled mode?
The C-ZB-RD1 can't be used as a remote, nor can it be decoupled, but the C-ZB-RD1P can be set in 1 of 3 different modes. These are:
  1. Dimmer mode:
    1. This is the default, and is for using the RD1P wired to the light you want to control.
    2. To return to this mode, short press the knob 3 times. A red LED should flash 6 times.
  2. Remote Mode (smart bulb mode):
    1. This is for using the RD1P to control a smart bulb, or other remote device.
    2. The RD1P can either be wired to the same circuit as the smart bulb, or it can be wired with one of our LED bypass modules.
    3. The RD1P will not physically control the device it's wired to, only remote mode is enabled.
    4. To enter this mode, short press the knob 4 times. A green LED should flash 6 times.
  3. Dual purpose mode:
    1. This is for using the RD1P for controlling both the wired circuit and a remote device.
    2. Turning or press the knob controls a remote device only. The wired circuit is controllable from your smart hub.
    3. To enter this mode, short press the knob 5 times.
For more information please see the following article:

Can I use Zigbee binding to control other bulbs using my RD1/RD1-Pro?
Yes you can, but this is not how the device is intended to be used. Your results will vary as different smart bulbs support different features.

We recommend using hub logic to use your RD1-Pro to control other smart devices.

 


    • Related Articles

    • [RD1 Series] Hardware & Dimming FAQs

      C-ZB-RD1-Pro: Which 3-in-1 mode should I choose? Feature Dimmer Mode (Default) Remote/Smart Bulb Mode Dual Purpose Mode Firmware ID C-ZB-RD1P-DIM C-ZB-RD1P-REM C-ZB-RD1P-DPM Use Case Smart control of traditional (non-smart) lighting circuit ...

    • [C-ZB-SR5BR] Zigbee 5 Button Rotary Remote - Getting Started

      Getting Started with your Candeo C-ZB-SR5BR Download the Instruction Manual here: 5 Button Rotary Remote Instruction Manual Pairing Prepare your smart hub: Home Assistant - ZHA zigbee2mqtt SmartThings Hubitat Hue Amazon Echo Other Zigbee 3.0 ...

    • [RD1 Series] Software & Hub FAQs

      Why does the device stay in the previous mode in Zigbee2MQTT? This is a known flaw with Zigbee2MQTT. Although the device has actually changed modes, the Zigbee2MQTT cache still registers the old mode when you re-pair. To successfully overcome this, ...

    • [C-ZB-SM30-2G] Remote & Binding FAQs

      Pairing a Zigbee Remote via TouchLink Short press K1 or K2 four times to start TouchLink commissioning. The process has a 180-second timeout; repeat if necessary. Bring the remote or touch panel within 10cm of the lighting device. Set the remote or ...

    • [C202/C202N] Can I use my rotary dimmer as a remote to control the brightess of another device? Or in decoupled mode?

      The simple answer to these questions is no, the dimmer can't be used as a remote, nor can it be decoupled. The rotary dimmer must always have a light circuit connected to it, so there is no way to control another device separately from the light ...