How to enable pairing mode on your Zigbee hub

How to enable pairing mode on your Zigbee hub


Home Assistant
Zigbee2MQTT
SmartThings
Hubitat
Other Zigbee 3.0 systems
Home Assistant
  1. Open your Home Assistant dashboard.
  2. Go to the menu and click on settings.
  3. Click "Devices & Services".
  4. Click the blue "ADD INTEGRATION" button.
  5. Click "Add Zigbee device".
  6. Home Assistant will scan for new Zigbee devices.

Zigbee2MQTT
  1. In zigbee2mqtt, click “Permit Join”
SmartThings
  1. Open your SmartThings app.
  2. Go to devices.
  3. Select the room of your choice.
  4. Tap the +.
  5. Choose "Add a device".
  6. Choose  "Scan nearby".

Hubitat
  1. Open your Hubitat dashboard:
  2. Go to Devices.
  3. Click "Add Device".
  4. Under "Add device manually" select Zigbee.
Other Zigbee 3.0 systems
Please refer to the documentation for your system.
 

    • Related Articles

    • [C201] Firmware update instructions for ZHA

      Please note these instructions are currently for ZHA only. If your date code is 20241020, 20240813 or 20230824 and you're using ZHA you do not need to do this update. You should not attempt this update unless your batch # and date code aren't in the ...

    • [C-ZB-LC20] Firmware update instructions for Home Assistant (ZHA and zigbee2mqtt)

      After the update, the device should report as C-ZB-LC20v2. zigbee2mqtt The update is available directly within the zigbee2mqtt interface. ZHA 1. Create a new folder inside your Home Assistant “config” directory for storing the OTA firmware file. In ...

    • [C-ZB-SR5BR] How do I install a new Home Assistant blueprint?

      ? Available Blueprints ? Candeo C-ZB-SR5BR – Multi-Light Dimming Control up to 4 lights from one SR5BR: ? Buttons 1–4 choose which light is “active”. ? Centre button toggles the active light on/off. ? Rotary ring dims the active light (clockwise ...

    • [201 Family] Candeo Zigbee Dimming Modules - Getting started

      Getting Started with your Candeo Zigbee Dimming Module Download the Instruction Manual here: C201 Instruction Manual C-ZB-DM201-2G Instruction Manual Wiring Instructions Please see our wiring articles: C201 Wiring C-ZB-DM201-2G Wiring Installation ...

    • [CMM-1] How do I install a new Home Assistant blueprint?

      Due to the Zigbee2MQTT 2.0.0 update, the Zigbee2MQTT blueprint has been updated, the old blueprint no longer works. (08/01/2025) If you haven't already installed our original blueprint, you can go ahead and click the Zigbee2MQTT Import to my home ...