[C-ZB-SM205-2G] How do I pair my zigbee lighting module to my zigbee hub?

[C-ZB-SM205-2G] How do I pair my zigbee lighting module to my zigbee hub?


  1. Factory Reset the module:
    1. After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device.
    2. To do this, press the reset button 5 times.
    3. If the module is not accessible, switch the power off and on 5 times.
    4. The lamp will blink 3 times to indicate a successful factory reset.
  2. Initiate pairing mode on your zigbee hub.
  3. Your hub will then find the switch.
  4. The lamp will blink 5 times to indicate successful pairing, and then stay on.
  5. If the hub does not successfully pair with the module, power the module off and power on, and try again within 15 seconds of powering on.