[C205] How do I pair my zigbee lighting module to Samsung Smartthings?

1. Factory Reset the module:
   
1. After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device.
   
2. To do this, press the reset button 5 times.
   
3. If the module is not accessible, switch the power off and on 5 times.
   
4. The lamp will blink 3 times to indicate a successful factory reset.
   
2. Install our new custom driver:
   
1. We recommend you unpair any C205 devices already paired first.
2. Go to:
   
   https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20
   
3. Sign in to your Samsung account.
   
4. Click "Enroll".
   
5. Click "Available Drivers".
   
6. Now find your model in the descriptions.
   
7. Click "Install" under the driver details.
3. Add the module to your Zigbee hub or bridge:
   
1. Open your Smartthings app.
   
1. Go to devices.
   
2. Select the room of your choice.
   
3. Tap the +.
   
4. Choose "Add a device".
   
5. Choose  "Scan nearby".
   
4. The lamp will blink 5 times and then stay on to indicate successful pairing.
   
1. If the hub does not successfully pair with the module, power the module off and power on, and try again within 15 seconds of powering on.

Please note, you only need to install the driver once. All further C205 devices should pick up the new driver.

• Related Articles

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to Samsung Smartthings?

  Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...

• [C203/C204] How do I pair my zigbee lighting module to Samsung Smartthings?

  Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...

• [C201] How do I pair my zigbee lighting module to Samsung Smartthings?

  Please note the new driver is currently for product codes #10 and above. Do not install it if your product code # is below 10. You can identify the # code on the back of the device. If you have multiple devices, of both compatible and incompatible ...

• [C-ZB-LC20] How do I pair my zigbee LED controller to Samsung Smartthings?

  Factory Reset the controller: Method 1: Press and hold the reset button for 5 seconds. The LED strip will flash 3 times. Method 2: Power on the controller. Within 2 seconds disconnect the power. Wait for at least 5 seconds. Repeat steps i. through ...

• [C-ZB-SM205-2G] How do I install a new Smartthings driver?

  Importing the driver. We recommend you unpair any C-ZB-SM205-2G devices already paired first. On your web browser go to: https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20 Sign in to your Samsung account. Click "Enroll". Click "Available ...