[C-ZB-DM201-2G] How do I pair my zigbee lighting module to Samsung Smartthings?

1. Factory Reset the module:
   
1. Press and hold the reset button for 5 seconds.
   
2. The LED will go red for 10 seconds, after which the reset is complete.
   
2. Install our new custom driver:
   
1. We recommend you unpair any C-ZB-DM201-2G devices already paired first.
2. Go to:
   
   https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20
   
3. Sign in to your Samsung account.
   
4. Click "Enroll".
   
5. Click "Available Drivers".
   
6. Now find your model in the descriptions.
   
7. Click "Install" under the driver details.
3. To initiate pairing mode to pair to Smartthings, open your Smartthings app:
1. Go to devices.
   
2. Select the room of your choice.
   
3. Tap the +.
   
4. Choose "Add a device".
   
5. Choose  "Scan nearby".
4. Put the lighting module into pairing mode:
   
1. Double press the reset button.
   
2. The LED will start blinking blue indicating that the module is in pairing mode. Pairing mode will time-out after 15 minutes.
   
3. The LED will stay solid blue for 10 seconds once pairing is complete.

Please note, you only need to install the driver once. All further C-ZB-DM201-2G devices should pick up the new driver.

• Related Articles

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to Samsung Smartthings?

  Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...

• [C203/C204/C-ZB-DM204] How do I pair my Zigbee lighting module to Samsung Smartthings?

  Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...

• [C201] How do I pair my zigbee lighting module to Samsung Smartthings?

  Please note the new driver is currently for product codes #10 and above. Do not install it if your product code # is below 10. You can identify the # code on the back of the device. If you have multiple devices, of both compatible and incompatible ...

• [C205] How do I pair my Zigbee lighting module to Samsung Smartthings?

  Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...

• [C-ZB-LC20] How do I pair my zigbee LED controller to Samsung Smartthings?

  Identify the capabilities of the LED strip you are using, and decide which mode you want to use on the 5-in-1 controller. If you haven't already, please install our custom driver for your mode. Instructions can be found here: Driver Instructions ...