[C201] How do I pair my zigbee lighting module to Samsung Smartthings?

[C201] How do I pair my zigbee lighting module to Samsung Smartthings?



Please note the new driver is currently for product codes #10 and above. Do not install it if your product code # is below 10.
You can identify the # code on the back of the device.
If you have multiple devices, of both compatible and incompatible product codes, you can either install the driver and change the drivers individually, or not install the driver.
  1. Factory Reset the module:
    1. Press and hold the reset button for 5 seconds.
    2. The LED will go red for 10 seconds, after which the reset is complete.
  2. Install our new custom driver:
    1. We recommend you unpair any C201 devices already paired first.
    2. Go to:
    3. Sign in to your Samsung account.
    4. Click "Enroll".
    5. Click "Available Drivers".
    6. Now find your model in the descriptions.
    7. Click "Install" under the driver details.
  3. To initiate pairing mode to pair to Smartthings, open your Smartthings app:
    1. Go to devices.
    2. Select the room of your choice.
    3. Tap the +.
    4. Choose "Add a device".
    5. Choose  "Scan nearby".
    1. Put the lighting module into pairing mode:
      1. Double press the reset button.
      2. The LED will start blinking blue indicating that the module is in pairing mode. Pairing mode will time-out after 15 minutes.
      3. The LED will stay solid blue for 10 seconds once pairing is complete.
    Please note, you only need to install the driver once. All further C201 devices should pick up the new driver.