[C310] Wi-Fi Dimming Plug - Getting Started
Getting Started with your Candeo C310
Pairing
- If this if your first device compatible with the Smart Life / Tuya ecosystem, you will need to download the Smart Life app from your relevant app store, and set up and account.
- Please ensure that Bluetooth and Wi-Fi are turned ON on your phone.
- There are known limitations with some Wi-Fi hubs, particularly BT models, that can sometimes prevent pairing in EZ Mode. If you have any difficulty pairing the plug using EZ Mode, please follow the instructions to pair in AP Mode below.
EZ Mode
AP Mode
EZ Mode
- Plug in your Candeo dimming Smart Plug, and ensure that the plug is turned on.
- Open the Smart Life app on your phone.
- Your plug will be automatically detected, allowing you to add it your list of devices by going through the instructions presented on the app.
AP Mode
- Ensure that the dimmer plug is on using the button on the side, and that any physical switches for the lamp are also on.
- Open your Smart Life app, and select the plus symbol to add a device.
- In the left hand menu, select "Lighting", and select "Light Source (Wi-Fi)"
- Select your Wi-Fi network, and enter the password. (Please note that your Wi-Fi network must work on a 2.4Ghz frequency).
- Click “Next”.
- Press the button on the side of the plug 3 times in quick succession.
- If the lamp and LED blink slowly 3 times (1 second each), then the plug is in AP pairing mode - continue to Step 8. alternatively,
- If the lamp and LED blink quickly 3 times (0.5 seconds each) then the plug is still in EZ pairing mode. Press the button on the side of the plug again 3 times in quick succession, and the lamp and LED will blink more slowly (1 second each), to indicate that the plug is now ready to be paired in AP Mode.
- In the Smart Life app select the option to "Confirm the indicator is blinking or breathing". Select "Blinking or breathing slowly" (You may only see part of this text, along with a bulb blinking slowly).
- You will now need to connect your phone to the Wi-Fi network created by the plug. Click "Reconnect" to open your Wi-Fi settings and select the Wi-Fi network – “SmartLife-XXXX”.
- Once connected go back, and Smart Life should continue the process.
- The Smart Life app will find your device and register the device on your Smart Life account.
- You will now have the option to rename your plug as you see fit, and be able to control the lamp dimmer in your Smart Life app.
FAQs and Troubleshooting
Related Articles
[C210 Zigbee Dimming Plug] Getting Started
Getting Started with your Candeo C210 Download the Instruction Manual here: C210 Instruction Manual Factory Reset the Device Turn on the plug and lamp. Press the button 3 times quickly (holding for at least 2 seconds on the 3rd press). The light will ...[C302-WF] Wi-Fi Rotary Dimmer - Getting Started
Getting Started with your Candeo C302-WF Download the Instruction Manual here: C302-WF Instruction Manual Wiring Instructions C302-WF Wiring Instructions Installation Instructions Please follow the wiring instructions article linked above, and then ...[201 Family] Candeo Zigbee Dimming Modules - Getting started
Getting Started with your Candeo Zigbee Dimming Module Download the Instruction Manual here: C201 Instruction Manual C-ZB-DM201-2G Instruction Manual Wiring Instructions Please see our wiring articles: C201 Wiring C-ZB-DM201-2G Wiring Installation ...[C203/C204/C-ZB-DM204] Candeo Zigbee Dimming Modules - Getting started
Getting Started with your Candeo Zigbee Dimming Module Download the Instruction Manual here: C203 and C-ZB-DM204 (C204) Instruction Manual Wiring Instructions Please see our wiring article: C203 and C-ZB-DM204 (C204) wiring Installation Instructions ...[C-WF-SSFS] Smart Switch Fused Spur - Getting Started
Getting Started with your Candeo C-WF-SSFS Download the Instruction Manual here: C-WF-SSFS Instruction Manual Wiring Instructions Turn off the power. Connect the power supply (Live and Neutral) to terminals marked L IN (brown/red cable) and N IN ...