[C302-WF] Retractive Switch Notes
Requirements
- Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off)
- Retractive switches should also be press to make, not press to break.
- Some retractive switches have one terminal for each mode, for example the Scolmore click range seem to use L1 for press to make, and L2 for press to break.
- In this case L2 should be avoided.
Related Articles
[C201/C203/C204/C-ZB-DM204] Retractive Switch Notes
Requirements Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off) Retractive switches should also be press to make, not press to break. Some retractive switches have one terminal for ...[C-WF-SSFS] Smart Switch Fused Spur - Getting Started
Getting Started with your Candeo C-WF-SSFS Download the Instruction Manual here: C-WF-SSFS Instruction Manual Wiring Instructions Turn off the power. Connect the power supply (Live and Neutral) to terminals marked L IN (brown/red cable) and N IN ...[C302-WF] My lights are flickering at low levels
Diagnosing this issue can be complicated and often dependent on many variables that are unique to the wiring in your house. However, the most common cause is due to either the total load of the lights being too low, or the wattage of one particular ...[C302-WF] My lights won't turn off properly
Diagnosing this issue can be complicated and often dependent on many variables that are unique to the wiring in your house. However, the most common cause is due to either the total load of the lights being too low, or the wattage of one particular ...[C302-WF] Changing the dimming mode
It is possible to change the dimming mode from Trailing Edge to Leading Edge (and vice versa). The default dimming mode is Trailing Edge and is suitable for most modern lighting applications. Should you need to change the dimming mode, please follow ...