[C203/C204] How do I pair my zigbee lighting module to my zigbee hub??

[C203/C204] How do I pair my zigbee lighting module to my zigbee hub?















For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or Smartthings please click the relevant link below:
  1. Home Assistant pairing instructions
  2. Hubitat pairing instructions
  3. Philips Hue pairing instructions
  4. Smartthings pairing instructions
  1. Factory Reset the module:
    1. After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device.
    2. To do this, press the reset button 5 times.
    3. If the module is not accessible, switch the power off and on 5 times.
    4. The lamp will blink 3 times to indicate a successful factory reset.
  2. Initiate pairing mode on your zigbee hub.
  3. The lamp will blink 5 times and then stay on to indicate successful pairing.
    1. If the hub does not successfully pair with the module, power the module off and power on, and try again within 15 seconds of powering on.