[C203/C204] How do I pair my zigbee lighting module to Home Assistant?

1. Factory Reset the module:
1. After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device.
   
2. To do this, press the reset button 5 times.
   
3. If the module is not accessible, switch the power off and on 5 times.
   
4. The lamp will blink 3 times to indicate a successful factory reset.
   
2. Add the module to your Home Assistant:
1. Open your Home Assistant dashboard.
   
2. Go to the menu and click on settings.
   
3. Click "Devices & Services".
   
4. Click the blue "ADD INTEGRATION" button.
   
5. Click "Add Zigbee device".
   
6. Home Assistant will scan for new Zigbee devices.
   
3. The lamp will blink 5 times and then stay on to indicate successful pairing.
1. If the hub does not successfully pair with the module, power the module off and on, and try again within 15 seconds of powering on.

• Related Articles

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to Home Assistant? (zigbee2mqtt)

  Add our custom zigbee2mqtt converter to your zigbee2mqtt instance: https://github.com/candeosmart/zigbee2mqtt Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need ...

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to Home Assistant? (ZHA)

  Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...

• [C201] How do I pair my zigbee lighting module to Home Assistant?

  Factory Reset the module: Press and hold the reset button for 5 seconds. The LED will go red for 10 seconds, after which the reset is complete. Add the module to your Home Assistant: Open your Home Assistant dashboard. Go to the menu and click on ...

• [C205] How do I pair my zigbee lighting module to Home Assistant?

  Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...

• [C-ZB-LC20] How do I pair my zigbee LED controller to Home Assistant?

  Factory Reset the controller: Method 1: Press and hold the reset button for 5 seconds. The LED strip will flash 3 times. Method 2: Power on the controller. Within 2 seconds disconnect the power. Wait for at least 5 seconds. Repeat steps i. through ...