[C203/C204] How do I pair my zigbee lighting module to Samsung Smartthings?

[C203/C204] How do I pair my zigbee lighting module to Samsung Smartthings?













  1. Factory Reset the module:
    1. After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device.
    2. To do this, press the reset button 5 times.
    3. If the module is not accessible, switch the power off and on 5 times.
    4. The lamp will blink 3 times to indicate a successful factory reset.
  2. Install our new custom driver:
    1. We recommend you unpair any C203/C204 devices already paired first.
    2. Go to:
    3. Sign in to your Samsung account.
    4. Click "Enroll".
    5. Click "Available Drivers".
    6. Now find your model in the descriptions.
    7. Click "Install" under the driver details.
  3. Add the module to your Zigbee hub or bridge:
    1. Open your Smartthings app.
      1. Go to devices.
      2. Select the room of your choice.
      3. Tap the +.
      4. Choose "Add a device".
      5. Choose  "Scan nearby".
  4. The lamp will blink 5 times and then stay on to indicate successful pairing.
    1. If the hub does not successfully pair with the module, power the module off and power on, and try again within 15 seconds of powering on.
Please note, you only need to install the driver once. All further C203/C204 devices should pick up the new driver.