FAQs and Troubleshooting
[C-ZB-RD1/C-ZB-RD1-Pro] How do I install Home Assistant ZHA quirks?
To do this you must have a file editor installed on your Home Assistant instance, our instructions are based on Studio Code Server. Editing your configuration.yaml file. On your Home Assistant instance click Studio Code Server. Select ...
[C-ZB-SR5BR] 5 button remote troubleshooting
The first step we recommend in any troubleshooting is a factory reset. This can be done by pressing the centre button quickly 5 times, and followed by a long 6th press (3 seconds). Please ensure that your hub is in range, typically <30m indoors. ...
[C-ZB-SR5BR] How do I install a new Home Assistant blueprint?
? Available Blueprints ? Candeo C-ZB-SR5BR – Multi-Light Dimming Control up to 4 lights from one SR5BR: ? Buttons 1–4 choose which light is “active”. ? Centre button toggles the active light on/off. ? Rotary ring dims the active light (clockwise ...
[CMM-1] How do I install a new Home Assistant blueprint?
Due to the Zigbee2MQTT 2.0.0 update, the Zigbee2MQTT blueprint has been updated, the old blueprint no longer works. (08/01/2025) If you haven't already installed our original blueprint, you can go ahead and click the Zigbee2MQTT Import to my home ...
[C501] Friends of Hue troubleshooting
The first step we recommend in any troubleshooting is a factory reset. To reset the switch: If possible, remove the switch from the Hue app you originally paired the switch to. (Do this in the Hue app). Take out the battery for 4 hours, and then ...
[CMM-1] Modmote troubleshooting
The first step we recommend in any troubleshooting is a factory reset. Normally we would suggest simply removing the modmote from your smart hub, and using the reset button to pair it again. If this does not work there is a reset switch underneath ...
[C501] Dimensions
[C501] Compatible frames
The key part of this controller is a universal, extremely rotary standard switch element that can be integrated in numerous frames by different manufacturers as listed below: Brand Model Beker S1, B1, B3, B7 glass Gira Standard55, E2, Event, Esprit ...
[C501] Installing your Friends of Hue switch
Installation The key part of this controller is a universal, extremely rotary standard switch element that can be integrated in numerous frames by different manufacturers as listed below: Brand Model Beker S1, B1, B3, B7 glass Gira Standard55, E2, ...
[CMM-1] Installing the back plate
The Modmote is fitted with a magnetic back plate than can be fixed to any flat surface using the 3M tape attached. Simply remove the cover of the tape and fix the back plate in your desired location. The remote can then be placed on the back plate, ...
[CMM-1] Changing the buttons
Candeo offers a range of alternative choices for the buttons on the Modmote, allowing you to change them to suit your requirements. You can remove the button tiles by lifting gently on the outside lip of tthe button tile, with the base of your palm ...
[CMM-1] Switching mode
To switch the mode of the Modmote from Dimming mode to Scene Switch mode (and vice versa), hold down buttons 3 and 4 for 10 seconds, until button 1 flashes green. Wait for 5 seconds before pressing any button, and the remote will switch modes
[CMM-1] Using as a Dimmer Switch
The Candeo Modmote can also be used as a dimmer switch with zigbee lights. To use as a Dimmer Switch, ensure that you have paired both the remote and the zigbee lights you want to control. Open the Modmote in the Smart Life app and select Remote ...
[CMM-1] Using as a Scene Switch (Primary function)
To use as a Scene Switch, select the remote within the Smart Life app, and select Device Trigger from within the function menu (bottom right button). From here you can create multi-device actions for each button using the “Create Intelligence” ...
[CMM-1] Charging the Modmote
Use a USB-C charger to charge the remote. The LED at button 3 will glow red to indicate charging. A full charge typically takes 4 hours. When charging is complete the LED at button 3 will glow green.