[CMM-1] Installing the back plate

1. The Modmote is fitted with a magnetic back plate than can be fixed to any flat surface using the 3M tape attached. Simply remove the cover of the tape and fix the back plate in your desired location.
   
2. The remote can then be placed on the back plate, and removed as you wish.

• Related Articles

• [CMM-1 Modmote] Zigbee Scene Remote - Getting Started

  Getting Started with your Candeo CMM-1 Download the Instruction Manual here: Modmote Instruction Manual Installation Instructions The Modmote is fitted with a magnetic back plate than can be fixed to any flat surface using the 3M tape attached. ...

• [CMM-1] Modmote troubleshooting

  The first step we recommend in any troubleshooting is a factory reset. Normally we would suggest simply removing the modmote from your smart hub, and using the reset button to pair it again. If this does not work there is a reset switch underneath ...

• [CMM-1] Charging the Modmote

  Use a USB-C charger to charge the remote. The LED at button 3 will glow red to indicate charging. A full charge typically takes 4 hours. When charging is complete the LED at button 3 will glow green.

• [RD1 Series] Installation & Physical Setup

  Welcome to the Installation and Physical Setup knowledge base. Below you will find answers regarding wiring requirements, back box dimensions, faceplate configurations, and hardware indicators for the Candeo RD1 and RD1-Pro series. 1. Electrical ...

• [CMM-1] Using as a Dimmer Switch

  The Candeo Modmote can also be used as a dimmer switch with zigbee lights. To use as a Dimmer Switch, ensure that you have paired both the remote and the zigbee lights you want to control. Open the Modmote in the Smart Life app and select Remote ...