Related Articles
[CMM-1] Charging the Modmote
Use a USB-C charger to charge the remote. The LED at button 3 will glow red to indicate charging. A full charge typically takes 4 hours. When charging is complete the LED at button 3 will glow green.
[CMM-1 Modmote] Zigbee Scene Remote - Getting Started
Getting Started with your Candeo CMM-1 Download the Instruction Manual here: Modmote Instruction Manual Installation Instructions The Modmote is fitted with a magnetic back plate than can be fixed to any flat surface using the 3M tape attached. ...
[CMM-1] Modmote troubleshooting
The first step we recommend in any troubleshooting is a factory reset. Normally we would suggest simply removing the modmote from your smart hub, and using the reset button to pair it again. If this does not work there is a reset switch underneath ...
[RD1-Pro] Smart Bulbs, Hue & Remote Mode
Welcome to the Smart Bulbs, Hue and Remote Mode hub. This section explains how to use the RD1-Pro as a decoupled controller, prevent cutting physical power to your smart lighting, and configure stable standby loads in no-neutral smart systems. 1. ...
[CMM-1] Using as a Dimmer Switch
The Candeo Modmote can also be used as a dimmer switch with zigbee lights. To use as a Dimmer Switch, ensure that you have paired both the remote and the zigbee lights you want to control. Open the Modmote in the Smart Life app and select Remote ...