[C-ZB-DM201-2G] How do I pair my Zigbee lighting module to Philips Hue?
Firstly, we recommend doing a factory reset:
- Turn on the light, press and hold the reset button for 10 seconds.
Then put the switch in network pairing mode.
- Double press the reset button to activate Zigbee pairing mode.
- In your Philips Hue app, go to “Settings”, then “Lights”, then add a light by selecting the “+”, then select “Search”.
Your Philips Hue Bridge will find the switch and give you the option to rename it as you wish.
Please note that only 1 device will be found but inside that device there will be 2 separate lights.
Related Articles
[C203/C204/C-ZB-DM204] How do I pair my Zigbee lighting module to Philips Hue?
Firstly, we recommend doing a factory reset: Turn on the light, press and hold the reset button for over 5 seconds. Then put the switch in network pairing mode. Double press the reset button to activate Zigbee pairing mode. In your Philips Hue app, ...[C-ZB-SM205-2G] How do I pair my Zigbee lighting module to Philips Hue?
Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...[C-ZB-LC20] How do I pair my zigbee LED controller to Philips Hue?
Factory Reset the controller: Method 1: Press and hold the reset button for 5 seconds. The LED strip will flash 3 times. Method 2: Power on the controller. Within 2 seconds disconnect the power. Wait for at least 5 seconds. Repeat steps i. through ...[C201] How do I pair my zigbee lighting module to Philips Hue?
Firstly, we recommend doing a factory reset: Turn on the light, press and hold the reset button for over 5 seconds. Then put the switch in network pairing mode. Double press the reset button to activate zigbee pairing mode. In your Philips Hue app, ...[C205] How do I pair my Zigbee lighting module to Philips Hue?
Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...