[C-ZB-LC20] How do I pair my zigbee LED controller to Philips Hue?
- Factory Reset the controller:
- Method 1:
- Press and hold the reset button for 5 seconds. The LED strip will flash 3 times.
- Method 2:
- Power on the controller.
- Within 2 seconds disconnect the power.
- Wait for at least 5 seconds.
- Repeat steps i. through iii. 5 times.
- The LED strip will flash 3 times.
- Add the module to your Zigbee hub or bridge:
- In your Philips Hue app, go to “Settings”.
- Select “Lights”,
- Then add a light by selecting the “+”.
- Select “Search”.
- Put the lighting module into pairing mode:
- Connect the controller the power source.
If your Hue bridge doesn't find the LED controller, please try powering the controller off and on again, or resetting the controller.
Related Articles
[C-ZB-LC20] How do I pair my zigbee LED controller to my zigbee hub?
For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or Smartthings please click the relevant link below: Home Assistant pairing instructions Hubitat pairing instructions Philips Hue pairing instructions Smartthings pairing ...
[C-ZB-LC20] How do I pair my zigbee LED controller to Hubitat Elevation?
Identify the capabilities of the LED strip you are using, and decide which mode you want to use on the 5-in-1 controller. If you haven't already, please install the custom driver for your mode. Instructions can be found here: Driver Instructions ...
[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Philips Hue?
Please note that the RD1-Pro will only work in dimmer mode with Philips Hue Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED ...
[C-ZB-LC20] How do I pair my zigbee LED controller to Home Assistant? (ZHA)
Identify the capabilities of the LED strip you are using, and decide which mode you want to use on the 5-in-1 controller. Factory Reset the controller: Method 1: Press and hold the reset button for 5 seconds. The LED strip will flash 3 times. Method ...
[C-ZB-LC20] How do I pair my zigbee LED controller to Samsung Smartthings?
Identify the capabilities of the LED strip you are using, and decide which mode you want to use on the 5-in-1 controller. If you haven't already, please install our custom driver for your mode. Instructions can be found here: Driver Instructions ...