[CSF1TZ] How do I pair my Smartfoss to Smartthings?

[CSF1TZ] How do I pair my Smartfoss to Smartthings?



  1. Install our new custom driver:
    1. We recommend you unpair any Smartfoss devices already paired first.
    2. Go to:
      https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20
    3. Sign in to your Samsung account.
    4. Click "Enroll".
    5. Click "Available Drivers".
    6. Now find your model in the descriptions.
    7. Click "Install" under the driver details.
      8. Notes
      Please note you only need to import the driver once for each model. After the import all new Smartfoss devices will pick up the new driver.

  2. Add the valve to your Zigbee hub or bridge:
    1. Open your Smartthings app.
      1. Go to devices.
      2. Select the room of your choice.
      3. Tap the +.
      4. Choose "Add a device".
      5. Choose "Scan nearby".
  3. Put the valve into pairing mode:
    1. Long press the button on the water timer for 3 seconds to initiate pairing mode. During the pairing process the LED indicator will flash red and green alternately.

    • Related Articles

    • [CSF1TZ] How do I install a new Smartthings driver?

      Install our new custom driver: We recommend you unpair any Smartfoss devices already paired first. On your web browser go to: https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20 Sign in to your Samsung account. Click "Enroll". Click ...

    • [CSF1TZ] How do I pair my Smartfoss to Hubitat?

      Import the custom driver: We recommend any Smartfoss devices previously added are unpaired and then paired again after a factory reset. On your Hubitat instance go to Drivers code. Click "+ New driver". Click "Import". Paste the following into the ...

    • [CSF1TZ] How do I pair my Smartfoss to my zigbee hub?

      For pairing instructions specific to Home Assistant, Hubitat, Smartthings or Tuya Smart Life please click the relevant link below: Home Assistant pairing instructions Hubitat pairing instructions Smartthings pairing instructions Tuya Smart Life ...

    • [C205] How do I pair my zigbee lighting module to Samsung Smartthings?

      Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...

    • [C203/C204] How do I pair my zigbee lighting module to Samsung Smartthings?

      Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...