[CSF1TZ] How do I pair my Smartfoss to Home Assistant ZHA?
We recommend you install our ZHA Smartfoss quirks first. The instructions can be found here:
- Add your dimmer to your Home Assistant:
- Open your Home Assistant dashboard.
- Go to the menu and click on settings.
- Click "Devices & Services".
- Click the blue "ADD INTEGRATION" button.
- Click "Add Zigbee device".
- Home Assistant will scan for new zigbee devices.
- Put the valve into pairing mode:
- Long press the button on the water timer for 3 seconds to initiate pairing mode. During the pairing process the LED indicator will flash red and green alternately.
Related Articles
[CSF1TZ] How do I install Home Assistant ZHA quirks?
To do this you must have file editor installed on your Home Assistant instance. Editing your configuration.yaml file. On your Home Assistant instance click file editor. Click the folder button ("Browse Filesystem") Select configuration.yaml, and then ...[C-ZB-SM205-2G] How do I pair my zigbee lighting module to Home Assistant? (ZHA)
Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...[CMM-1] How do I pair the Modmote with Home Assistant? (ZHA)
We recommend you install our ZHA modmote quirks, and the modmote blueprint first. The instructions can be found here: https://support.candeo.io/portal/en/kb/articles/cmm-1-how-do-i-install-home-assistant-zha-quirks ...[C202/C202N] How do I pair my zigbee rotary switch to Home Assistant? (ZHA)
Factory Reset the switch: Turn on the light, press the knob 5 times with a long press on the fifth time (3 seconds). Once reset successfully, the lamp will blink 5 times. Note: All configuration parameters will be reset after the device is reset or ...[C205] How do I pair my zigbee lighting module to Home Assistant?
Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...