[CSF1TZ] How do I pair my Smartfoss to Hubitat?

[CSF1TZ] How do I pair my Smartfoss to Hubitat?



  1. Import the custom driver:
    1. We recommend any Smartfoss devices previously added are unpaired and then paired again after a factory reset.
    2. ​On your Hubitat instance go to Drivers code.
    3. Click "+ New driver".
    4. Click "Import".
    5. Paste the following into the box that pops up:
      https://raw.githubusercontent.com/candeosmart/hubitat-zigbee/main/Candeo%20CSF1TZ%20Zigbee%20Smart%20Irrigation%20Timer.groovy
    6. Click "Import".
    7. Click "Save".
      8. Please note you only need to import the driver once for each model. After the import all new devices of that model will pick up the new driver.

  2. Add the valve to your Zigbee hub or bridge:
    1. Initiate pairing mode to pair to Hubitat. (Adding to your Zigbee Network)
      1. Open your Hubitat dashboard.
      2. Go to devices.
      3. Click "Add Device".
      4. Under "Add device manually" select zigbee.
  3. Put the valve into pairing mode:
    1. Long press the button on the water timer for 3 seconds to initiate pairing mode. During the pairing process the LED indicator will flash red and green alternately.

    • Related Articles

    • [CSF1TZ] How do I install a new Hubitat driver?

      Importing the driver. On your Hubitat instance go to Drivers code. Click "+ New driver". Click "Import". Paste the following into the box that pops up: ...

    • [CSF1TZ] How do I pair my Smartfoss to Smartthings?

      Install our new custom driver: We recommend you unpair any Smartfoss devices already paired first. Go to: https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20 Sign in to your Samsung account. Click "Enroll". Click "Available Drivers". Now ...

    • [CSF1TZ] How do I pair my Smartfoss to my zigbee hub?

      For pairing instructions specific to Home Assistant, Hubitat, Smartthings or Tuya Smart Life please click the relevant link below: Home Assistant pairing instructions Hubitat pairing instructions Smartthings pairing instructions Tuya Smart Life ...

    • [CSF1TZ] How do I install a new Smartthings driver?

      Install our new custom driver: We recommend you unpair any Smartfoss devices already paired first. On your web browser go to: https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20 Sign in to your Samsung account. Click "Enroll". Click ...

    • [C201] How do I pair my zigbee lighting module to Hubitat Elevation?

      Please note the new driver is currently for product codes #10 and above. Do not install it if your product code # is below 10. You can identify the # code on the back of the device. If you have multiple devices, of both compatible and incompatible ...