[C202] Can I remove the faceplate?
Yes you can.
The rotary knob can be pulled off giving the access to remove the faceplate.
Alternatively – you might be interested in the C202N which is sold without a faceplate.
Related Articles
[C-ZB-RD1P] Which mode should I choose for my 3-in-1 Zigbee rotary dimmer?
Feature Dimmer Mode (Default) Remote/Smart Bulb Mode Dual Purpose Mode Firmware ID C-ZB-RD1P-DIM C-ZB-RD1P-REM C-ZB-RD1P-DPM Use Case Smart control of traditional (non-smart) lighting circuit containing dimmable lights Use as smart rotary remote for ...[C-ZB-RD1/C-ZB-RD1P] Will my Zigbee rotary dimmer act as a repeater?
All of our mains powered Zigbee products will act as repeaters within your Zigbee mesh network. Please note that the C-ZB-RD1C is not a Zigbee product.[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Home Assistant? (ZHA)
Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds. Add our custom zigbee2mqtt converter to your ...[C-ZB-RD1/C-ZB-RD1P] Instruction booklet
Instruction booklet for C-ZB-RD1 and C-ZB-RD1P can be downloaded here.[C-ZB-RD1/C-ZB-RD1P] How do I pair my RD1/RD1-Pro Zigbee rotary switch to Home Assistant? (zigbee2mqtt)
Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the red LED will stay on for 3 seconds. Add our custom zigbee2mqtt converter to your ...