[CSF1TZ] Getting started

[CSF1TZ] Getting started



Once you have successfully paired the water timer to your Smart Life app, you can access the features of the device with 4 main smart control options.

Open the device in your Smart Life app, and the main controls are across the bottom of the page:




 Manual mode

Use this button to manually start and stop the water timer. The default time to automatically turn off a manual watering event is 10 minutes, and this can be changed by tapping “Manual Duration” in the middle of the screen.

 Set the delay time in the event of rain

This option allows you to delay any scheduled irrigation in the event of rain, and for a determined time period following the rain.

 Set a scheduled program

This option allows you to create 2 different types of schedule program:

  1. Normal Schedule - allowing you to program the days of the week, the time, and duration for each scheduled watering.
  2. Cycle and Soak - allowing you program repeat irrigation cycles during the determined days and time.
 Check the history

This option shows you your total water consumption and irrigation history.


    • Related Articles

    • [CSF1TZ] How do I pair my Smartfoss to Smart Life?

      Make sure your phone is prepared: Install the Smart Life app from your store (you can scan the qr code or click the links): Google Play or Apple app store Open the app and create an account if you don't already have one. A Tuya zigbee gateway must ...
    • [CSF1TZ] Instruction booklet

      Instruction booklet for CSF1TZ Smartfoss can be downloaded here.
    • [CMM-1] How do I pair the Modmote with Tuya Smart Life?

      Make sure your phone is prepared: Install the Smart Life app from your store (you can scan the qr code or click the links): Google Play or Apple app store Open the app and create an account if you don't already have one. A Tuya zigbee gateway must ...
    • [CSF1TZ] How do I pair my Smartfoss to my zigbee hub?

      For pairing instructions specific to Home Assistant, Hubitat, Smartthings or Tuya Smart Life please click the relevant link below: Home Assistant pairing instructions Hubitat pairing instructions Smartthings pairing instructions Tuya Smart Life ...
    • [C310] Pairing to Smart Life

      Important notes This is a dimming plug and only intended for use with lamps. Please do not plug anything into this which is not a lamp. This dimming plug should not be used with lamps that already have a dimmer attached. This plug is not intended to ...