[C201] How do I pair my zigbee lighting module to my zigbee hub?

For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or Smartthings please click the relevant link below:

1. Home Assistant pairing instructions
2. Hubitat pairing instructions
   
3. Philips Hue pairing instructions
4. Smartthings pairing instructions
   

1. Factory Reset the module:
   
1. Press and hold the reset button for 5 seconds.
   
2. The LED will go red for 10 seconds, after which the reset is complete.
2. Initiate pairing mode on your zigbee hub.
3. Put the lighting module into pairing mode:
1. Double press the reset button.
   
2. The LED will start blinking blue indicating that the module is in pairing mode. Pairing mode will time-out after 15 minutes.
   
3. The LED will stay solid blue for 10 seconds once pairing is complete.

• Related Articles

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to my zigbee hub?

  For pairing instructions specific to Home Assistant, Hubitat or Smartthings please click the relevant link below: Home Assistant (ZHA) pairing instructions Home Assistant (Zigbee2MQTT) pairing instructions Hubitat pairing instructions Philips Hue ...

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to Home Assistant? (zigbee2mqtt)

  Add our custom zigbee2mqtt converter to your zigbee2mqtt instance: https://github.com/candeosmart/zigbee2mqtt Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need ...

• [C205] How do I pair my zigbee lighting module to my zigbee hub?

  For pairing instructions specific to Home Assistant, Hubitat or Smartthings please click the relevant link below: Home Assistant pairing instructions Hubitat pairing instructions Philips Hue pairing instructions Smartthings pairing instructions ...

• [C203/C204] How do I pair my zigbee lighting module to my zigbee hub?

  For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or Smartthings please click the relevant link below: Home Assistant pairing instructions Hubitat pairing instructions Philips Hue pairing instructions Smartthings pairing ...

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to Hubitat Elevation?

  Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...