[C-ZB-SSFS] Smart Switch Fused Spur - Getting Started

[C-ZB-SSFS] Smart Switch Fused Spur - Getting Started

Zigbee - Smart Switched Fused Spur (13A High Load)

Manual & Documentation

Download the official PDF instruction manual for detailed specifications and safety notes.

Installation Instructions

To install your smart switch, please remove the screws to take off the front, then the back can be screwed onto the wall.

  1. Turn off the mains power.
  2. Connect the power supply (Live and Neutral) to the terminals marked L IN (brown/red cable) and N IN
  3. Connect the load to L OUT and N OUT.
    Both Live and Neutral must be connected to the load to ensure the Double Pole Switch can fully isolate the load and that Zigbee Power Monitoring functions correctly.
  4. Connect the Earth wire to the E terminal if required.
  5. The load cable can be fed through the cable exit at the bottom of the product and secured with the cable clamp

Factory Reset the Device

Hold the On / Off button down until the Blue LED starts flashing, then release it immediately.

  • The Zigbee network information will be cleared.

Confirmation: Once reset successfully, the blue LED will stop flashing.

Pairing

Prepare Your Smart Hub

Home Assistant - ZHA [Click to Expand ▾]
Home Assistant ZHA

Core features will work out of the box with Home Assistant ZHA. However, to access the full set of supported features, we recommend installing our Candeo custom ZHA quirk.

You can find the latest Candeo ZHA quirks on our GitHub repository.

For step-by-step installation guidance, see our How to Install Drivers, Quirks and Blueprints guide.

Zigbee2MQTT [Click to Expand ▾]
Zigbee2MQTT

No preparation is needed — the device will work natively with Zigbee2MQTT.

SmartThings [Click to Expand ▾]
SmartThings

The core features are supported natively on SmartThings, but we recommend installing our edge driver for better stability.

  1. We recommend you unpair any existing C-ZB-SSFS devices first.
  2. Open your browser and navigate to the Candeo SmartThings Drivers Invitation.
  3. Sign in to your Samsung account and click Enroll.
  4. Click Available Drivers.
  5. Locate your model in the driver list.
  6. Click Install under the driver details.
Hubitat [Click to Expand ▾]
Hubitat

You will need to instal our driver.

Importing the Driver:

  1. We recommend unpairing any previously added C-ZB-SSFS devices, then performing a factory reset before re-pairing.
  2. In your Hubitat web menu, navigate to Drivers Code.
  3. Click + New Driver.
  4. Click Import.
  5. Paste the following URL into the prompt:

    https://raw.githubusercontent.com/candeosmart/hubitat-zigbee/refs/heads/main/Candeo%20C-ZB-SSFS%20Zigbee%20Smart%20Switched%20Fused%20Spur.groovy

  6. Click Import.
  7. Click Save.
Amazon Echo [Click to Expand ▾]
Amazon Echo

Core switching features are natively supported across Amazon Echo devices with built-in Zigbee hubs. For advanced features or custom parameter configuration, a dedicated Zigbee hub platform is recommended.

Other Zigbee 3.0 Platforms [Click to Expand ▾]

The device may work well with other Zigbee systems, but we do not currently support them.

Put the Device in Pairing Mode

  1. Hold the On/Off button down until the Blue LED starts flashing, then release it immediately.
  2. The blue LED will continue to flash slowly, indicating that the device is now in Zigbee pairing mode.
  3. Initiate the Zigbee pairing process in your Smart Home hub and the device will be found.
  4. The Blue LED will stop flashing as soon as pairing is complete.
Tip Need hub-specific steps? Check our hub pairing mode article or consult your hub's manufacturer instructions.
Need further assistance? Browse C-ZB-SSFS FAQs →