[C310] Wi-Fi Dimming Plug - Getting Started

[C310] Wi-Fi Dimming Plug - Getting Started


Manual & Documentation

Download the Instruction Manual here:

Pairing

NoteIf this if your first device compatible with the Smart Life / Tuya ecosystem, you will need to download the Smart Life app from your relevant app store, and set up and account. Please ensure that Bluetooth and Wi-Fi are turned ON on your phone. There are known limitations with some Wi-Fi hubs, particularly BT models, that can sometimes prevent pairing in EZ Mode. If you have any difficulty pairing the plug using EZ Mode, please follow the instructions to pair in AP Mode below.
EZ Mode [Click to Expand ▾]
  1. Plug in your Candeo dimming Smart Plug, and ensure that the plug is turned on.
  2. Open the Smart Life app on your phone.
  3. Your plug will be automatically detected, allowing you to add it your list of devices by going through the instructions presented on the app.


AP Mode [Click to Expand ▾]
  1. Ensure that the dimmer plug is on using the button on the side, and that any physical switches for the lamp are also on.
  2. Open your Smart Life app, and select the plus symbol to add a device.
  3. In the left hand menu, select "Lighting", and select "Light Source (Wi-Fi)"
  4. Select your Wi-Fi network, and enter the password. (Please note that your Wi-Fi network must work on a 2.4Ghz frequency).
  5. Click “Next”.
  6. Press the button on the side of the plug 3 times in quick succession.
    1. If the lamp and LED blink slowly 3 times (1 second each), then the plug is in AP pairing mode - continue to Step 8. alternatively,
    2. If the lamp and LED blink quickly 3 times (0.5 seconds each) then the plug is still in EZ pairing mode. Press the button on the side of the plug again 3 times in quick succession, and the lamp and LED will blink more slowly (1 second each), to indicate that the plug is now ready to be paired in AP Mode.
  7. In the Smart Life app select the option to "Confirm the indicator is blinking or breathing". Select "Blinking or breathing slowly" (You may only see part of this text, along with a bulb blinking slowly).
  8. You will now need to connect your phone to the Wi-Fi network created by the plug. Click "Reconnect" to open your Wi-Fi settings and select the Wi-Fi network – “SmartLife-XXXX”.
  9. Once connected go back, and Smart Life should continue the process.
  10. The Smart Life app will find your device and register the device on your Smart Life account.
    1. You will now have the option to rename your plug as you see fit, and be able to control the lamp dimmer in your Smart Life app.
Need further assistance? Browse C310 FAQs →