Setting Up
[C202/C202N] How do I pair my zigbee rotary switch to Home Assistant? (zigbee2mqtt)
Add our custom zigbee2mqtt converter to your zigbee2mqtt instance: https://github.com/candeosmart/zigbee2mqtt Home Assistant will pick the right version for each C202. Factory Reset the switch: Turn on the light, press the knob 5 times with a long ...
[C202/C202N] How do I pair my zigbee lighting module to my zigbee hub?
For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or Smartthings please click the relevant link below: Home Assistant ZHA pairing instructions Home Assistant zigbee2mqtt pairing instructions Hubitat pairing instructions ...
[C202/C202N] How do I pair my zigbee rotary switch to Samsung Smartthings?
Please note the new driver is currently for product codes #10 and above. Do not install it if your product code # is below 10. You can identify the # code on the back of the device. If you have multiple devices, of both compatible and incompatible ...
[C202/C202N] How do I pair my zigbee rotary switch to Hubitat Elevation?
Please note the new driver is currently for product codes #10 and above. Do not install it if your product code # is below 10. You can identify the # code on the back of the device. If you have multiple devices, of both compatible and incompatible ...
[C202/C202N] How do I pair my zigbee rotary switch to Home Assistant? (ZHA)
Factory Reset the switch: Turn on the light, press the knob 5 times with a long press on the fifth time (3 seconds). Once reset successfully, the lamp will blink 5 times. Note: All configuration parameters will be reset after the device is reset or ...
[C202/C202N] Advanced configuration
TouchLink to a Zigbee Remote: Turn on the light, press the knob 3 times with a long press on the third time (3 seconds). The light will blink 3 times and then stay continuously on to show that the device is in TouchLink commissioning mode. This times ...
[C202/C202N] Setting the minimum brightness
Turn on the light, then press the knob 3 times. The light will blink twice showing that the device is in configuration mode. Adjust the minimum brightness to the lowest level you are satisfied with, then press the knob once to save it.
[C202/C202N] Wiring instructions
Turn off the power. To avoid electric shock and/or equipment damage, disconnect electrical power at the main fuse or circuit breaker before installation and maintenance. Be aware that even if the circuit breaker is off, some voltage may remain in the ...
[C202/C202N] How do I pair my zigbee rotary switch to Philips Hue?
Firstly, we recommend doing a factory reset: Turn on the light, press the knob 5 times with a long press (3 seconds) on the fifth time. Once reset successfully, the lamp will flash 5 times. Then put the switch in network pairing mode: Turn on your ...